TX-SR3100 - Quick Menu
You can quickly set convenient features such as adjusting sound quality.
You can make the settings on the TV screen during playback. Press Q QUICK
MENU on the remote controller to display the Quick Menu.
Select the item with the cursors ^/v UP/DOWN of the remote controller, and
press the ENTER button to confirm your selection.
Use the cursors to change the settings.
- To return to the previous screen, press RETURN/EXIT.
- To exit the settings, press Q QUICK MENU.
Note
When the input signals are ones that need a high bandwidth, such as 8K
signals, the Quick Menu may not be displayed.
HDMI
A/V Sync: If the video is behind the audio, you can delay the audio to offset the
gap. The setting can be set for each input.
- It cannot be set if the listening mode is Direct.
Audio Return Channel: You can enjoy the sound of the HDMI-connected ARC
compatible TV through the speakers connected to the unit. Select "On" when
listening to the audio of TV using the speakers of this unit. Select "Off" when the
ARC function is not used.
Audio
Music Optimizer: Improve the quality of the compressed audio. Playback sound
of lossy compressed files such as MP3 will be improved. The setting can be set
for each input. This works in signals whose sampling frequencies are 48 kHz or
less. The setting is not effective in the bitstream signals.
- It cannot be set if the listening mode is Direct.
Late Night: Enable small sounds to be easily heard in detail. It is useful when
you need to reduce the volume while watching a movie late night.
- This function cannot be used in the following cases.
– When playing Dolby Digital Plus or Dolby TrueHD with "Loudness
Management" set to "Off"
– When the input signal is DTS:X, and "Dialog Control" is not 0 dB
– When the input signal is Analog/DSD and the listening mode is Direct.
Stereo Assign: This function enables you to select a pair of speakers to output
stereo sound. Apart from the front speakers (Front), you can select the Surround
speakers (Surround), Height speakers (Height).
- The listening mode switches to "Stereo" if the audio output destination is
changed.
Digital Filter: You can switch the type of digital filter in the AUDIO DAC (digital
analog converter). You can choose "Slow" (gives the sound a soft and fluid feel),
"Sharp" (gives the sound more structure and firmer feel), "Short" (gives the
sound a feeling of a quick start and moving forward), or "Auto" (automatic). The
setting can be separately set to each input selector. This can be set when the
sampling frequency is 44.1 kHz or more.
Room EQ
AccuEQ: Enable or disable the equalizer function that corrects for sound
distortion caused by the acoustic environment of the room.
On (All Ch): EQ that corrects according to the room acoustics acquired with the
AccuEQ calibration is applied to all channels.
On (ex. L/R): The same EQ as "On (All Ch)" is applied to speakers other than the
Front Speakers. EQ correction for the Front Speakers is turned off.
- The setting can be separately set to each input selector.
- It cannot be set if the listening mode is Direct.
Cinema Filter: Adjusts the soundtrack with the enhanced high range so that it
suits a home theater.
The following listening modes can be used: Dolby Audio - DD, Dolby Audio -
DD+, Dolby Audio - Surr, Dolby Audio - TrueHD, Multichannel, DTS, DTS-HD,
DTS Neural:X and DSD
Level
Front: Adjust the speaker level of the front speakers while listening to the sound.
Center: Adjust the speaker level of the center speaker while listening to the sound.
Subwoofer: Adjust the speaker level of the subwoofer while listening to the
sound.
- If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.
Comments
0 comments
Please sign in to leave a comment.