TX-NR6050 Display
1. Speaker/Channel display: Displays the output channel that corresponds to the selected
listening mode.
2. Lights in the following conditions.: Headphones are connected.
Z2: ZONE 2 is on.: Connected by BLUETOOTH.
: Connected by Wi-Fi.
NET: Lights when connected to the network with the "NET" input selector. It will blink if incorrectly
connected to the network.
USB: Lights when the "NET" input selector is selected, a USB device is connected and the
USB input is selected. It will blink if the USB device is not properly connected.
HDMI: HDMI signals are input and the HDMI
input is selected.
DIGITAL: Digital signals are input and the digital
input is selected.
A: Audio is output only to ZONE A.
B: Audio is output only to ZONE B.
AB: Audio is output to both ZONE A and ZONE B.
3. Lights according to the type of input digital audio signal and the listening mode.
4. Lights in the following conditions.
TUNED: Receiving AM /FM radio
FM ST: Receiving FM stereo.
SLEEP: Sleep timer is set.
AUTO STBY: Auto Standby is set. ( →p122)
5. Blinks when muting is on.
6. Displays various information of the input signals.
7. Cursors ( /
): These may light when performing operations while “NET” is selected with the input selector.
light when there are multiple folders or files that are available to be selected.
light when text information does not fit with the range provided by “6”.
Comments
0 comments
Please sign in to leave a comment.