TX-8470 Works with Sonos

Connecting this unit and Sonos Port allows you to send the music or music sources on the Sonos App to this unit. Through Sonos Port, you can play this unit with the same group of another Sonos device on the network or can play only on this unit. Also, if you start to play music from Sonos App, this unit is
automatically turned on and the link function to switch input works.
         • When "2.Control" - "Network Standby" is set to "Off" in the Setup menu, turn this unit on                            manually, and press the NET button on the remote controller. In the factory default setting, the                  Network Standby function ( →p80) is set to On.
         • You can register a maximum of 2 Sonos Port.

         • Sonos Port
         • RCA audio cable (supplied with Sonos Port)

1. Connect the Sonos Port to the AUDIO IN jack of this unit with the RCA audio
cable supplied with the Sonos Port. Any input jacks other than the PHONO
jack can be used.
       • A digital cable can also be connected. For details, refer to the instruction manual of Sonos.

A setup is required to play Sonos on this unit. Make the setting according to the following procedure.
1. Press the SETUP button on the remote controller, select "5. Works with SONOS", and press the ENTER button.
2. Select the following items with the cursors / UP/DOWN and set each item.
Input Selector:
       Enable the interlocking function with the Sonos Port. With the cursors /
       LEFT/RIGHT, select the input selector to which the Sonos Port is connected.
Connected Device: Press the ENTER button to display Sonos devices connected to the same network as the network of this unit. Select the Sonos Port connected to the unit and press the ENTER button.
       • Products (e.g. Play:3 unequipped with an output terminal) other than the Sonos Port are also                      displayed in the device list and selectable. In that case, when playback on the Sonos side starts, the            input is switched, however, audio is not output. Select the room name of the connected Sonos Port.
       • Up to 32 devices can be displayed on the Sonos product list screen. If you cannot find the Sonos                Port to be interlocked, return to the previous screen, turn off the product you do not want to                      interlock, and try again.

Output Zone: With the cursors / LEFT/RIGHT, select the ZONE where you want to
listen to the music.
"Main": Outputs audio only to the main room (where this unit is located).
"Zone 2": Outputs audio only to the separate room (ZONE 2).
"Main/Zone 2": Outputs audio to both the main room and separate room (ZONE 2).
Preset Volume:  You can set the volume that Sonos Port will be played at beforehand. After
pressing the ENTER button, press the cursor buttons / LEFT/RIGHT to select a value from "Last" (Volume level before entering standby mode), "Min", "0.5" to "99.5" and "Max".
      • When making the setting for the second unit, press the cursor DOWN several times to move to the             next page, and change the menu from "SONOS-1" to "SONOS-2".

1. Select desired tracks using Sonos App and send the tracks to the room where this unit is located (or to the group). It is recommended to give an easy to- remember name to the combination of this unit and Sonos Port, such as TV Room or Living Room where this unit is located.
      • If the input selector of this unit is not automatically switched even after the start of music playback,          stop the playback once and start again.
      • When the "Volume Pass Through" mode has been selected with the Sonos App settings, you can                 use the Sonos App to control the volume of this unit.
* You cannot use the "Preset Volume" function when the "Volume Pass Through" mode has been selected.