TX-8470 Using My Input

You can register a variety of settings, such as the current input selection or listening mode, in the 4 MY INPUT presets, and then recall these easily.
For example: Press the MY INPUT button to automatically switch input to “TUNER” and start receiving the registered station. It also switches to the registered listening mode and volume level.

– Input selection (It is also possible to register Network services and DAB
(European models)/AM (North American models)/FM radio stations.)
– Listening modes
– Volume level (“82” is the upper limit)
– Output destination (Multi Zone)
– TREBLE/BASS/BALANCE, etc.
*If an AM/FM/DAB radio station is registered, the TUNER preset numbers “37”, “38”, “39”, and “40” ( →p48) are overwritten.

With the unit in the state you want to register, perform the following procedure:
1. Press and hold one of the MY INPUT buttons 1 to 4.
2. “Preset Written” appears on the display and the settings are registered. 
Content is overwritten if there was any already registered.

1. Press one of the MY INPUT buttons 1 to 4.
• Even when the main unit is in standby mode, it comes ON when you press the MY INPUT button.