TX-8470 Bluetooth

Change the settings for the Bluetooth function.
     • Wait for a while if "4. Bluetooth" cannot be selected. It can be selected when the Bluetooth function            is activated.
(Bluetooth Receiver)
Bluetooth Receiver (Default Value: On)
Select whether or not to use the function that receives audio from Bluetooth
wireless technology enabled devices.

Auto Input Change (Default Value: On)
When a Bluetooth enabled device is played while it is connected to the unit, the
input of the unit can be automatically switched to "BLUETOOTH".

Auto Reconnect (Default Value: On)
This function automatically reconnects to the Bluetooth enabled device
connected last when you change the input to "BLUETOOTH".
     • This may not work with some Bluetooth enabled devices.

Pairing Information (Default Value: -)
You can initialize the pairing information stored on this unit. If you are no longer
able to connect with a device you have paired, try doing this. ( →p97)                                                   

Pressing ENTER when "Clear" is displayed initializes the pairing information
stored on this unit.
     • This function does not initialize the pairing information on the Bluetooth enabled device. When                  pairing the unit again with the device, be sure to clear  the pairing information on the Bluetooth                enabled device beforehand. For information on how to clear the pairing information, refer to the                instruction manual of the Bluetooth enabled device.                                                                           
Device (Default Value: -)                                                              
Displays the name of the Bluetooth enabled device connected to the unit.
        • The name is not displayed when "Status" is "Ready" and "Pairing".                                                   
Status (Default Value: -)
Displays the status of the Bluetooth enabled device connected to the unit.                                                   

(Bluetooth Transmitter)
Bluetooth Transmitter (Default Value: Off)
Select whether or not to use the function that transmits audio from this unit to
Bluetooth wireless technology enabled devices.

Search Devices (Default Value: -)                                                  
Search for a Bluetooth wireless technology enabled device that is able to receive the audio from this unit. Select "Start" then press ENTER. A list of the names of Bluetooth wireless technology enabled devices that are able to receive is displayed. Select the device to be connected with the cursors /
UP/DOWN, then pairing begins when you press ENTER.
Output Level (Default Value: Variable)                                        
You can select whether to adjust the volume on this unit or to adjust it on the
Bluetooth wireless technology enabled device.

aptX HD (Default Value: Off)
It is possible to use aptX HD to connect a Bluetooth wireless technology enabled
device and this unit.
       • The codec of the receiving device must be compatible with aptX HD.

Low Latency Mode (Default Value: Off)
If the audio from a device connected via Bluetooth is delayed compared to the video on the TV when watching a gaming screen, etc., you can reduce the audio delay.

Pairing Information (Default Value: -)
You can initialize the pairing information stored on this unit. If you are no longer
able to connect with a device you have paired, try doing this. ( →p97)                                                         
Pressing ENTER when "Clear" is displayed initializes the pairing information stored on this unit.
        • This function does not initialize the pairing information on the Bluetooth  enabled device. When                 pairing the unit again with the device, be sure to clear the pairing information on the Bluetooth                 enabled device in advance. For information on how to clear the pairing information, refer to the                 Bluetooth enabled device's instruction manual.

Device (Default Value: -)                                                              
Displays the name of the Bluetooth enabled device connected to the unit.
        • The name is not displayed when "Status" is "Ready" and "Pairing".                                                   
Status (Default Value: -)
Displays the status of the Bluetooth enabled device connected to the unit.