TX-RZ30 Listening To the Radio (North American and Taiwanese models)

You can receive AM/FM radio stations on this unit with the built-in tuner.
Listening To the AM/FM Radio                                                     
Perform the following procedure when this unit is on.
Tuning Automatically
1. Press the TUNER button on the remote controller repeatedly to select either
“AM” or “FM”.
2. Press MODE button repeatedly to display "TunMode: Auto" on the display.
                                                   
3. When you press the cursors / UP/DOWN, automatic tuning starts, and searching stops when a station is found. When tuned in to a radio station, the "TUNED" indicator on the display lights up. When tuned in to an FM radio station, the "FM ST" indicator lights up.
When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( →p71). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception.

Tuning Manually
Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception.
1. Press the TUNER button on the remote controller repeatedly to select either “AM” or “FM”.
2. Press MODE button repeatedly to display "TunMode: Manual" on the display.
                                                       
3. While pressing the cursors / UP/DOWN, select the desired radio station.
• Each time you press the cursors / UP/DOWN, the frequency changes by 1 step. If the button is held down, the frequency changes continuously, and if the button is released, the frequency stops changing.

Presetting a Radio Station                                                             
Registration Procedure
You can preset up to 40 of your favorite radio stations.
After tuning in to the radio station you want to register, perform the following procedure.
1. Press MEMORY so that the preset number on the display blinks.

                                                   
2. While the preset number is blinking (approx. 8 seconds), repeatedly press the cursors LEFT/RIGHT to select a number between 1 and 40.
3. Press MEMORY again to register the station.
When the station is registered, the preset number stops flashing. Repeat this procedure for all of your favorite radio stations.

Selecting a Preset Radio Station
1. Press TUNER.
2. Press the cursors LEFT/RIGHT to select a preset number.
Deleting a Preset Radio Station
1. Press TUNER.
2. Press the cursors LEFT/RIGHT to select the preset number to delete.
3. After pressing MEMORY, press CLEAR while the preset number is blinking, and delete the preset number. When deleted, the number on the display disappears.