TX-RZ30 Setup Menu
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press SETUP on the remote controller to display the Setup menu.
Select the item with the cursors UP/DOWN of the remote controller, and press the ENTER button to confirm your selection.
Use the cursors LEFT/RIGHT to change the default values.
• To return to the previous screen, press RETURN.
• To exit the settings, press the SETUP button.
Menu list
1. Input/Output Assign
1. TV Out / OSD- Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. p103
2. HDMI Input- You can change input assignment between the input selectors and HDMI IN jacks. p105
3. Video Input Change input assignment between the input selectors and COMPONENT VIDEO IN jacks and the VIDEO IN jacks. p106
4. Digital Audio Input- Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks. p106
5. Analog Audio Input- Change input assignment between the input selectors and AUDIO IN jacks. p107
2. Speaker
1. Configuration- Change the settings of connection environment of the speakers. p108
2. Crossover- Change the settings of crossover frequencies. p110
3. Distance- Set the distance from each speaker to the listening position. p111
4. Level Calibration- Adjust the volume level of each speaker. p112
5. Dolby Enabled Speaker- Change the settings of Dolby Enabled Speakers. p112
6. Equalizer Settings- You can adjust the output volume of the range for each connected speaker. p113
7. THX Audio- Change the THX Audio settings. p113
8. Speaker Virtualizer- The Speaker Virtualizer function can be switched between On and Off. p114
9. Speaker Combo- You can optimize the crossover value to match Klipsch speakers. p115
3. Audio Adjust
1. Multiplex/Mono Change the settings of multiplex audio playback. p116
2. Dolby Change the setting of when Dolby signals are input. p116
3. DTS/IMAX Change the setting of when DTS signals are input. p117
4. LFE Level Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM,
and DSD signals. p118
5. Volume Change the Volume settings. p118
4. Source
1. My Input Volume Set a volume value for each input selector. p119
2. Name Edit Set an easy name for each input. p119
3. Audio Select Select the prioritized input terminal when multiple audio sources are connected to one input selector. p119
4. Video Select When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input from which video is displayed on the TV. p120
5. Hardware
1. HDMI Change the settings for the HDMI functions. p121
2. Network Change the settings for the Network functions. p123
3. Bluetooth Change the settings for the BLUETOOTH function. p126
4. Power Management Change the settings for the power-save function. p128
5. 12V Trigger Change the settings for 12V TRIGGER OUT jack. p130
6. Works with SONOS Change the settings to connect with the Sonos Port. p130
6. Multi Zone
1. Zone 2 Change the settings for Zone 2. p132
2. Zone 3 Change the settings for Zone 3. p132
3. Remote Play Zone Change the settings for remote play. p133
7. Miscellaneous
1. Tuner Change the settings for Tuner. p134
2. Remote ID Change the remote controller ID. p134
3. Firmware Update Change the settings for Firmware Update. p134
4. Initial Setup Make the initial setup from the setup menu. p135
5. Lock Lock the Setup menu so that the settings cannot be changed. p135
6. Factory Reset All the settings are restored to factory defaults. p135
Comments
0 comments
Please sign in to leave a comment.