TX-RZ30 Input/Output Assign
1. TV Out / OSD
Make settings for TV output and On-Screen Displays (OSD) that appear on the
TV. HDMI Out (Default Value: MAIN)
Select the HDMI jack to be connected with the TV.
• If devices with different resolutions are connected to HDMI OUT MAIN jack and SUB jack, images are output with the lower resolution.
MAIN | When connecting the TV to the HDMI OUT MAIN jack |
SUB | When connecting the TV to the HDMI OUT SUB jack |
MAIN+SUB | When connecting to both the MAIN and SUB jacks |
Dolby Vision (Default Value: MAIN)
To output Dolby Vision video from the player to a TV that supports Dolby Vision, select either the HDMI OUT MAIN jack or HDMI OUT SUB jack to which the Dolby Vision-supported TV is connected. This setting is only necessary if you have set "HDMI Out" to "MAIN+SUB" and you have connected a TV to both the
MAIN and SUB jacks.
MAIN | To output Dolby Vision video to a Dolby Vision-supported TV connected to the HDMI OUT MAIN jack |
SUB | To output Dolby Vision video to a Dolby Vision-supported TV connected to the HDMI OUT SUB jack |
Off | After selecting "MAIN" or "SUB", if the video on the TV does not appear correctly |
Upscaling (Default Value: Off)
When a TV supporting 4K/8K is used, video signals input with 1080p can be automatically output with 4K/8K. Video signals that are input at 4K can also automatically be output as 8K. Note that to output as 8K, set "HDMI 4K/8K Signal Format" ( →p104) to "8K Standard" or "8K Enhanced", and you need to
connect to a TV that is compatible with the 8K signal format with an HDMI cable.
• If the TV does not support the 4K/8K resolution with the same frequency as the frequency of HDMI input video signals, upscaling to 4K or 8K is not correctly performed. Check the frequency of 4K/8K resolution supported by the TV, and change the resolution of the video signals input from the AV
component.
Off |
When this function is not used • If your TV does not support 4K/8K, set it to "Off". |
Auto | When this function is used |
Super Resolution (Default Value: 2)
When "Upscaling" is set to "Auto", select the correction level of the input video signals from "Off" and "1" (weak) to "3" (strong).HDMI 4K/8K Signal Format
Set the 4K/8K signal format input and output by this unit. Set to suit the TV or
player connected.
• The corresponding resolution is different depending on the HDMI jack
connected. See "Corresponding input resolutions" ( →p179) for details.
BD/DVD (Default Value: 4K Enhanced)
GAME (Default Value: 8K Enhanced)
CBL/SAT (Default Value: 4K Enhanced)
STRM BOX (Default Value: 4K Enhanced)
PC (Default Value: 4K Enhanced)
AUX (Default Value: 4K Enhanced)
CD (Default Value: 4K Enhanced)
TV (Default Value: 4K Enhanced)
PHONO (Default Value: 4K Enhanced)
TUNER (Default Value: 4K Enhanced) *
* Model not equipped with a tuner
4K Standard | When using a High Speed HDMI Cable that supports 10.2 Gbps to connect a TV or player compatible with standard 4K signal formats (4K 30 Hz, etc.) |
4K Enhanced |
When using a Premium High Speed HDMI Cable that supports 18 Gbps to connect a TV or player compatible with high definition 4K signal formats (4K 60 Hz, 4K HDR, etc.) • There may be some image disruption depending on the connected component and the HDMI cable. If this occurs, switch to "4K Standard". |
8K Standard | When using a ULTRA High Speed HDMI Cable that supports 48 Gbps to connect a TV or player compatible with 4K 120 Hz, 5K 30 Hz, or 8K 30 Hz signal formats |
8K Enhanced | When using an ULTRA High Speed HDMI Cable that supports 48 Gbps to connect a TV or player compatible with 5K 60 Hz or 8K 60 Hz signal formats |
Zone 2 HDMI (Default Value: Not Use)
Make the setting when you output to the Zone 2 TV connected to the HDMI OUT
ZONE 2 jack.
Use | Enable this function |
Not Use |
Disable this function • When video and audio via HDMI input are output to ZONE 2, |
OSD Language (Default Value: English)
Select the on-screen display language from the following.
(North American models)
English, German, French, Spanish, Italian, Dutch, Swedish
(European, Middle East, Australian and Asian models)
English, German, French, Spanish, Italian, Dutch, Swedish, Russian, Chinese Impose OSD (Default Value: On)
Set whether or not to display information such as volume adjustment or switching of input on the TV screen.
On | OSD is displayed on the TV • OSD may not be displayed depending on the input signal even if "On" is selected. In this case, change the resolution of the connected device. |
Off | OSD is not displayed on the TV |
Mini Player OSD (Default Value: Always On)
You can display on the TV the images from another input selected last while playing the audio from NET or BLUETOOTH input. After switching the input to NET or BLUETOOTH, play the images and audio. And then when you press MODE on the remote controller, the image is displayed in full-screen mode, and
the audio information (Mini Player) for NET or BLUETOOTH is displayed in the corner of the screen. You can set whether to always display this Mini Player on the screen.
• Each time the MODE button is pressed, the image display/non-display can be switched.
• This setting cannot be selected if "Impose OSD" is set to "Off".
• This function cannot be used when "OSD Language" is set to Chinese.
(European, Middle East, Australian and Asian models)
Always On | The Mini Player is always displayed. |
Auto Off | The Mini Player turns off automatically in 30 seconds after displayed. If operation such as changing the volume is performed, it is displayed again for 30 seconds. |
Screen Saver (Default Value: 3 minutes)
Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes", "10 minutes" and "Off". 2. HDMI Input
You can change input assignment between the input selectors and HDMI IN jacks.BD/DVD (Default Value: HDMI 1 (HDCP 2.3))
GAME (Default Value: HDMI 2 (HDCP 2.3))
CBL/SAT (Default Value: HDMI 3 (HDCP 2.3))
STRM BOX (Default Value: HDMI 4 (HDCP 2.3))
PC (Default Value: HDMI 5 (HDCP 2.3))
AUX (Default Value: HDMI 6 (HDCP 2.3))
CD (Default Value: ---)
TV (Default Value: ---)
PHONO (Default Value: ---)
TUNER (Default Value: ---) *
* Model not equipped with a tuner
"HDMI 1 (HDCP 2.3)" to "HDMI 6 (HDCP 2.3)":
Assign any HDMI IN jack to each of the input selectors. If you do not assign a jack, select "---". To select an HDMI IN jack already assigned to another input selector, change its setting to "---" first. 3. Video Input
Change input assignment between the input selectors and COMPONENT VIDEO IN jacks and the VIDEO IN jacks. If you do not assign a jack, select "---". BD/DVD (Default Value: COMPONENT)
GAME (Default Value: ---)
CBL/SAT (Default Value: VIDEO 1)
STRM BOX (Default Value: VIDEO 2)
PC (Default Value: ---)
CD (Default Value: ---)
TV (Default Value: ---)
PHONO (Default Value: ---)
TUNER (Default Value: ---) *
* Model not equipped with a tuner
COMPONENT | Assign the COMPONENT VIDEO IN jacks to any input selector. |
VIDEO 1, VIDEO 2 |
Assign the VIDEO IN jacks to any input selector. |
4. Digital Audio Input
Change input assignment between the input selectors and DIGITAL IN
COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---". BD/DVD (Default Value: COAXIAL)
GAME (Default Value: ---)
CBL/SAT (Default Value: ---)
STRM BOX (Default Value: ---)
PC (Default Value: ---)
CD (Default Value: ---)
TV (Default Value: OPTICAL)
PHONO (Default Value: ---)
TUNER (Default Value: ---) *
* Model not equipped with a tuner
COAXIAL,OPTICAL | Assign the COAXIAL terminal or OPTICAL terminal to any input selector. |
5. Analog Audio Input
Change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "---". BD/DVD (Default Value: AUDIO 1)
GAME (Default Value: AUDIO 2) *1
CBL/SAT (Default Value: AUDIO 3)
STRM BOX (Default Value: AUDIO 4)
PC (Default Value: ---)
CD (Default Value: AUDIO 5)
TV (Default Value: AUDIO 6)
PHONO (Default Value: PHONO) *2
TUNER (Default Value: AUDIO 2) *3
*1 North American and Taiwanese models
*2 The setting cannot be changed
*3 Model not equipped with a tuner
AUDIO 1, AUDIO 2, AUDIO 3, AUDIO 4, AUDIO 5, AUDIO 6 |
Assign the AUDIO IN terminal to any input selector. |
Comments
0 comments
Please sign in to leave a comment.