TX-RZ 30 Hardware
1. HDMI
Change the settings of the HDMI function. HDMI CEC (Default Value: On)
Setting this to "On" enables the input selection link and other link functions with HDMI-connected CEC-compatible device.
When this setting is changed, turn off and then on again the power of all connected devices.
• Depending on the TV to use, a link setting may be required on the TV.
• This function is effective only when the device is connected to the HDMI OUT MAIN jacks.
• Setting this to "On" and closing the operation screen will display the name of the connected CEC-compatible device and "CEC On" on the main unit’s display.
• When this function is set to "On", the power consumption in standby state increases, however, the increase in power consumption is minimized by automatically entering the HYBRID STANDBY mode where only the essential circuits operate.
• If you operate the MASTER VOLUME dial on the main unit when this setting is "On" and audio is output from the TV speakers, audio will be output also from the speakers connected to this unit. To output audio from only either of them, change the setting of this unit or TV, or reduce the volume of this unit.
• If abnormal behavior is observed when this is set to "On", set it to "Off".
• If a connected device is not CEC-compatible, or if you are not sure whether it is compatible, set it to "Off".
On | When this function is used |
Off | When this function is not used |
HDMI Standby Through (Default Value: Auto (Eco))
When this is set to anything other than "Off", you can play the video and audio of an HDMI-connected player on the TV even if the unit is in standby mode. Also, only "Auto" and "Auto (Eco)" can be selected if "HDMI CEC" is set to "On". If you select anything else, set "HDMI CEC" to "Off".
• When this function is set to a value other than "Off", the power consumption in standby state increases, however, the increase in power consumption is minimized by automatically entering the HYBRID STANDBY mode where only the essential circuits operate.
• To play a non-CEC compliant player on the TV, turn the unit on and switch the input.
• When using a CEC-compliant TV, you can reduce the power consumption in standby mode by selecting "Auto (Eco)".
Off | When this function is not used |
BD/DVD, GAME, CBL/SAT, STRM BOX, PC, AUX, CD, TV, PHONO, TUNER* |
For example, if you select "BD/DVD", you can play the equipment connected to the "BD/DVD" jack on the TV even if the unit is in standby mode. Select this setting if you have decided which player to use with this function. Inputs that have not been allocated to HDMI jacks in "Input/ Output Assign" - "HDMI Input" cannot be selected. • Even when an HDMI IN jack has been allocated to TV, TV cannot be select when "Audio Return Channel (eARC supported)" ( →p122) is set to "On". *European, Middle East, Australian and Asian models |
Last | You can play on the TV the video and audio of the input selected immediately before the unit is switched to standby. When "Last" is selected, you can switch the input of the unit using the remote controller or the Onkyo Controller even in the standby mode. |
Auto, Auto (Eco) | Select one of these settings when you have connected equipment that conforms to the CEC standard. You can play the video and audio of the input selected on the TV, irrespective of what input was selected immediately prior to the unit being switched to standby, using the CEC link function. |
Audio TV Out (Default Value: Auto)
You can enjoy audio through the speakers of the TV while this unit is on.
• This setting is fixed to "Auto" if you set "Input/Output Assign" - "TV Out/ OSD" - "HDMI Out" or "HDMI" - "HDMI Out" in the "Quick Menu" to "MAIN" or "MAIN+SUB" and set "HDMI CEC" to "On". If you change this setting, set "HDMI CEC" to "Off".
• Listening mode cannot be changed while "Audio TV Out" is set to "On" and audio is being output from the TV.
• Depending on your TV or input signal of the connected device, audio may not be output from the TV even if this is set to "On". In such a case, audio is output from the speakers of the unit.
• Audio is output from this unit if you operate the MASTER VOLUME dial on this unit when audio that is input to this unit is output from your TV speakers. If you do not want to output audio, change the setting of this unit or TV, or reduce the volume of this unit.
On | When this function is used |
Off | When this function is not used |
Auto | When the "HDMI Out" setting is "MAIN" or "MAIN+SUB" and the "HDMI CEC" setting is "On", the setting is fixed to "Auto". With "Auto", when audio is output from the TV speakers, audio is not output from the speakers of this unit, and when audio is output from the speakers of this unit, audio is not output from the TV speakers. • If the HDMI CEC setting is off on the TV, there may be audio output from both the TV speakers and the speakers of this unit. |
Audio Return Channel (eARC supported) (Default Value: On)
You can enjoy the sound of an HDMI-connected ARC-compatible TV or eARC compatible TV through the speakers connected to the unit.
On | When enjoying the TV sound through the speakers connected to the unit |
Off | When the ARC function or eARC function is not used |
Auto Lip Sync (Default Value: On)
Automatically corrects desynchronization between the video and audio signals based on the information from the HDMI Lip-Sync-compatible TV.
On | When enabling the automatic correction function |
Off | When not using the automatic correction function |
2. Network
Change the settings of the Network function.
• When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each components, you must set "DHCP" to "Disable", assign an address to this unit in the "IP Address" setting, and set information related to
your LAN, such as Subnet Mask and Gateway.Wi-Fi (Default Value: Off(Wired))
Connect the unit to the network via a wireless LAN router.
• When switching between "On" and "Off(Wired)", stop the Network service. Also, when group playback is in process, cancel the group playback once, and then switch the setting.
On | Wireless LAN connection |
Off(Wired) | Wired LAN connection |
Wi-Fi Setup (Default Value: -)
Configure wireless LAN settings by pressing ENTER with "Start" displayed. Wi-Fi Status (Default Value: -)
The information of the connected access point is displayed.
SSID | SSID of the connected access point. |
Signal | Signal strength of the connected access point. |
Status | Status of the connected access point. |
MAC Address (Default Value: -)
Check the MAC address of this unit.
This value is specific to the component and cannot be changed. DHCP (Default Value: Enable)
Enable | Auto configuration by DHCP |
Disable |
Manual configuration without DHCP • If you select "Disable", set "IP Address", "Subnet Mask", |
IP Address (Default Value: 0.0.0.0)
Displays/Sets the IP address. Subnet Mask (Default Value: 0.0.0.0)
Displays/Sets the subnet mask. Gateway (Default Value: 0.0.0.0)
Displays/Sets the gateway. DNS Server (Default Value: 0.0.0.0)
Displays/Sets the primary DNS server.
Proxy URL (Default Value: -)
Displays/Sets the proxy server URL. Proxy Port (Default Value: 8080)
Displays/Sets the proxy server port number when you input "Proxy URL".
Friendly Name (Default Value: Onkyo TX-RZ30 XXXXXX)
Change the model name of this unit which is displayed on the device connected to the network to an easily recognized name.
1. Press ENTER to display the Edit screen.
2. Select a character or symbol with the cursors, and press ENTER.
Repeat this operation to input up to 31 characters.
"A/a": Switches between upper and lower cases. (Pressing MODE on the
remote controller also toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction. : Removes a character on the left of the cursor.
: Enters a space.
• Pressing CLEAR on the remote controller will remove all the input characters.
3. After inputting, select "OK" with the cursors, and press ENTER.
The input name will be saved.AirPlay (Default Value: On)
Select whether or not to use the AirPlay function.
On | When this function is used |
Off | When this function is not used |
AirPlay Device Name (Default Value: Onkyo TX-RZ30 XXXXXX)
Change the model name of this unit which is displayed on the AirPlay connected device to an easily recognized name.
1. Press ENTER to display the Edit screen.
2. Select a character or symbol with the cursors, and press ENTER.
Repeat this operation to input up to 31 characters.
"A/a": Switches between upper and lower cases. (Pressing MODE on the
remote controller also toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.: Removes a character on the left of the cursor.
: Enters a space.
• Pressing CLEAR on the remote controller will remove all the input characters.
3. After inputting, select "OK" with the cursors, and press ENTER.
The input name will be saved.
• This function cannot be used when registering this unit to Home App.
AirPlay Password (Default Value: -)
You can set a password of up to 31 characters so that only users that have input can use AirPlay.
1. Press ENTER to display the Edit screen.
2. Select a character or symbol with the cursors, and press ENTER.
Repeat this operation to input up to 31 characters.
"A/a": Switches between upper and lower cases. (Pressing MODE on the remote controller also toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.: Removes a character on the left of the cursor.
: Enters a space.
• To select whether to mask the password with or display it in plain text, press MEMORY on the remote controller.
• Pressing CLEAR on the remote controller will remove all the input characters.
3. After inputting, select "OK" with the cursors, and press ENTER.
The input password will be saved.
• This function cannot be used when registering this unit to Home App.Privacy Statement (Default Value: Not Accepted)
When using a network service that requires a login name, email address, password, etc., you need to agree to the Privacy Statement of our company.
• This setting can be made after confirming the Privacy Statement. When you select "Privacy Statement" and press ENTER, the Privacy Statement is displayed.
• When "Not Accepted" is selected, the login name, email address, password, etc., that are kept on this unit will be deleted and you will be logged out from the network service you have logged in.Network Check (Default Value: -)
You can check the network connection.
Press ENTER when "Start" is displayed.
• Wait for a while if "Network" cannot be selected. It can be selected when the network function is activated.
3. Bluetooth
Change the settings for the BLUETOOTH function.
• Wait for a while if "Bluetooth" cannot be selected. It can be selected when the
BLUETOOTH function is activated.
(Bluetooth Receiver)Bluetooth Receiver (Default Value: On)
Select whether or not to use the function that receives audio from BLUETOOTH wireless technology enabled devices.
On | When this function is used |
Off | When this function is not used |
Auto Input Change (Default Value: On)
When a BLUETOOTH enabled device is played while it is connected to the unit, the input of the unit can be automatically switched to "BLUETOOTH".
On | The input will automatically become "BLUETOOTH" when a BLUETOOTH enabled device is connected. |
Off | The function is disabled. • If the input is not switched automatically, set this to "Off", and change the input manually. |
Auto Reconnect (Default Value: On)
This function automatically reconnects to the BLUETOOTH enabled device connected last when you change the input to "BLUETOOTH".
• This may not work with some BLUETOOTH enabled devices.
On | When this function is used |
Off | When this function is not used |
Pairing Information (Default Value: -)
You can initialize the pairing information stored on this unit. If you are no longer able to connect with a device you have paired, try doing this.
Pressing ENTER when "Clear" is displayed initializes the pairing information stored on this unit.
• This function does not initialize the pairing information on the BLUETOOTH enabled device. When pairing the unit again with the device, be sure to clear the pairing information on the BLUETOOTH enabled device beforehand. For information on how to clear the pairing information, refer to the instruction manual of the BLUETOOTH enabled device.Device (Default Value: -)
Displays the name of the BLUETOOTH enabled device connected to the unit.
• The name is not displayed when "Status" is "Ready" and "Pairing". Status (Default Value: -)
Displays the status of the BLUETOOTH enabled device connected to the unit.
Ready | Not paired |
Pairing | Paired |
Connected | Successfully connected |
Bluetooth Transmitter)Bluetooth Transmitter (Default Value: Off)
Select whether or not to use the function that transmits audio from this unit to BLUETOOTH wireless technology enabled devices.
On (Tx) | When this function is to be used (played back only on BLUETOOTH wireless technology enabled devices) |
On (Main + Tx) | When this function is to be used (played back both on this unit and on BLUETOOTH wireless technology enabled devices) |
Off | When this function is not used |
Search Devices (Default Value: -)
Search for a BLUETOOTH wireless technology enabled device that is able to receive the audio from this unit. Select "Start" then press ENTER. A list of the names of BLUETOOTH wireless technology enabled devices that are able to receive is displayed. Select the device to be connected with the cursors
UP/DOWN, then pairing begins when you press ENTER.Output Level (Default Value: Variable)
You can select whether to adjust the volume on this unit or to adjust it on the BLUETOOTH wireless technology enabled device.
Variable | To use the volume controls on this unit |
Fixed | To use the volume controls on the BLUETOOTH wireless technology enabled device |
aptX HD (Default Value: Off)
It is possible to use aptX HD to connect a BLUETOOTH wireless technology enabled device and this unit.
• The codec of the receiving device must be compatible with aptX HD.
On | When this function is used |
Off | When this function is not used |
Low Latency Mode (Default Value: Off)
If the audio from a device connected via BLUETOOTH is delayed compared to the video on the TV when watching a gaming screen, etc., you can reduce the audio delay.
On | When this function is used |
Off | When this function is not used |
Pairing Information (Default Value: -)
You can initialize the pairing information stored on this unit. If you are no longer able to connect with a device you have paired, try doing this.
Pressing ENTER when "Clear" is displayed initializes the pairing information stored on this unit.
• This function does not initialize the pairing information on the BLUETOOTH enabled device. When pairing the unit again with the device, be sure to clear the pairing information on the BLUETOOTH enabled device in advance. For information on how to clear the pairing information, refer to the BLUETOOTH enabled device's instruction manual.Device (Default Value: -)
Displays the name of the BLUETOOTH enabled device connected to the unit.
• The name is not displayed when "Status" is "Ready" and "Pairing".Status (Default Value: -)
Displays the status of the BLUETOOTH enabled device connected to the unit.
Ready | Not paired |
Pairing | Not paired Paired |
Connected | Successfully connected |
Connected (aptX) | Successfully connected with aptX compatible device |
Connected (aptX HD) | Successfully connected with aptX HD compatible device |
4. Power Management
Change the settings for the power-save function. Sleep Timer (Default Value: Off)
30 minutes, 60 minutes, 90 minutes |
You can allow the unit to enter standby automatically when the specified time has elapsed. Select a value from "30 minutes", "60 minutes" and "90 minutes". |
Off | Does not turn the unit to standby automatically. |
Auto Standby (Default Value: On/Off)
This setting allows the unit to enter standby mode automatically after 20 minutes of inactivity without any video or audio input. (When "USB Power Out at Standby" or "Network Standby" is enabled, the unit enters the HYBRID STANDBY mode which minimizes the increase in power consumption.)
• Default values vary depending on the regions.
On | The unit will automatically enter standby mode ("AUTO STBY" will light). • "Auto Standby" is displayed on the main unit’s display and TV screen 30 seconds before entering standby mode. • "Auto Standby" does not work when Zone 2/Zone 3 is active. |
Off | The unit will not automatically enter standby mode. |
Auto Standby in HDMI Standby Through (Default Value: On/Off)
Enable or disable "Auto Standby" while "HDMI Standby Through" is on.
• Default values vary depending on the regions.
On |
The setting will be enabled. • This setting cannot be set to "On" if "Auto Standby" and |
Off | The setting will be disabled. |
USB Power Out at Standby (Default Value: Off)
Devices connected to the USB port (5 V/1 A) on the rear of the unit can be supplied with electricity even when this unit is in standby mode when this function is "On".
• When this function is set to "On", the power consumption in standby state increases, however, the increase in power consumption is minimized by automatically entering the HYBRID STANDBY mode where only the essential circuits operate.
Network Standby (Default Value: On)
When this function is set to "On", the network function works even in standby state, and you can turn on the power of the unit via network using an application such as Onkyo Controller that can control this unit.
• When this function is set to "On", the power consumption in standby state increases, however, the increase in power consumption is minimized by automatically entering the HYBRID STANDBY mode where only the essential circuits operate. Note that even if this function is set to "Off", when any of the HDMI CEC ( →p121), HDMI Standby Through ( →p121), USB Power Out at Standby ( →p128) and Bluetooth Wakeup ( →p129) functions is enabled, this function will be in "On" state regardless of the
setting.
• When connection to the network is lost, "Network Standby" may be disabled to reduce power consumption. In such a case, turn the unit on by using the power button on the remote controller or main unit.Bluetooth Wakeup (Default Value: Off)
This function wakes up the unit on standby by connecting a BLUETOOTH enabled device. This is effective when "Bluetooth" - "Bluetooth Receiver" is set to "On".
On | When this function is used • When this function is set to "On", the power consumption in standby state increases, however, the increase in power consumption is minimized by automatically entering the HYBRID STANDBY mode where only the essential circuits operate. |
Off | When this function is not used • This setting is fixed to "Off" if "Bluetooth" - "Bluetooth Receiver" is set to "Off". • This setting is also fixed to "Off" if "Bluetooth" - "Bluetooth Receiver" - "Auto Input Change" is set to "Off". |
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be
selected. It can be selected when the network function is activated.
5. 12V Trigger
Set when outputting the control signal (maximum 12 V/100 mA) through the 12V TRIGGER OUT jack. You can enable power link operation when you connect theunit and the external devices equipped with 12V trigger input jack. Zone (Default Value: Main)
Set which zone to output the 12V trigger when playing. If you select "All", then the 12V trigger is output to all zones that are playing.
Off | When the control signal is not output |
Main | When controlling the power of external devices linked to the input selection in the main room |
Zone 2 | When controlling the power of external devices linked to the input selection in ZONE 2 |
Zone 3 | When controlling the power of external devices linked to the input selection in ZONE 3 |
All | When controlling the power of external devices linked to the input selection in the main room, in ZONE 2 or in ZONE 3 |
6. Works with SONOS
Change the settings to connect with the Sonos Port.
(SONOS-1/SONOS-2/SONOS-3)Input Selector (Default Value: Off)
Select the input selector to which the Sonos Port is connected.
• Selecting "Off" disables the interlock function with Sonos.Connected Device (Default Value: -)
Displays the Sonos Port connected to the same network as the network of this unit. Press the ENTER button to select the connected Sonos Port.
• Products (e.g. Play:3 unequipped with an output terminal) other than the Sonos Port are also displayed in the device list and selectable. In that case, when playback on the Sonos side starts, the input is switched, however, audio is not output. Select the room name of the connected Sonos Port.
• Up to 32 devices can be displayed on the Sonos product list screen. If you cannot find the Sonos Port to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again.
• To use this function, set "Input Selector" beforehand.
Output Zone (Default Value: Main)
Select the zone where you want to listen to the music.
• To use this function, set "Input Selector" beforehand.
Main | Outputs audio only to the main room (where this unit is located). |
Zone 2 | Outputs audio only to the separate room (ZONE 2). |
Main/Zone 2 | Outputs audio to both the main room and separate room (ZONE 2). |
Zone 3 | Outputs audio only to the separate room (ZONE 3). |
Main/Zone 3 | Outputs audio to both the main room and separate room (ZONE 3). |
Zone 2/Zone 3 | Outputs audio to both the separate rooms (ZONE 2 and ZONE 3). |
Main/Zone 2/ Zone 3 |
Outputs audio to the main room and both separate rooms (ZONE 2 and ZONE 3). |
Preset Volume (Default Value: Main=Last / Zone 2=Last / Zone 3=Last)
You can set the volume beforehand for playing back the Sonos Port. You can set volumes for the main room (where this unit is located) and separate room (ZONE 2 or ZONE 3) respectively. Select a value from "Last" (Volume level before entering standby mode), "Min", "0.5" to "99.5" and "Max". (When
"Volume Display" is set to "Absolute")
• To use this function, set "Input Selector" beforehand.
Comments
0 comments
Please sign in to leave a comment.