TX-RZ30 Input Formats and Selectable Listening Modes
You can select a variety of listening modes according to the audio format of the signal to be input.
• Selectable listening modes when headphones are connected are Pure Audio, Mono, Direct, and
Stereo only.
(*1) You cannot select any mode other than Pure Audio, Stereo, AllCh Stereo and Mono Music if the sampling rate is 5.6/11.2 MHz.
(*2) A center speaker or surround speakers need to be installed.
(*3) If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected.
(*4) This can only be selected when no surround back speaker is connected.
(*5) Surround back speakers need to be installed. Can be selected when the input format is 5.1 ch.
(*6) If the input format is any of the following and the number of channels is monaural, this listening mode becomes unavailable.
– DTS, DTS 96/24, DTS Express, DTS-HD HR, DTS-HD MSTR, PCM, music file
(*7) Surround speakers or height speakers need to be installed.
(*8) A center speaker, surround speakers, or height speakers need to be installed.
(*9) Cannot be selected if "Speaker Virtualizer" ( →p114) is set to "Off".
(*10) Cannot be selected when the "IMAX Mode" ( →p117) is set to "Off" (the default value is Auto).
(*11) Surround speakers need to be installed.
(*12) Cannot be selected when the input format is monaural.
(*13) The listening mode displayed depends on the speaker layout ( →p156). Furthermore, when the setting for "Speaker Virtualizer" ( →p114) is "Off" (the default value is On), then modes other than Atmos and
DSur cannot be selected.
(*14) This cannot be selected when the input format is DTS Express.
(*15) Can only be selected when the "IMAX Mode" ( →p117) is set to "Off" (the default value is Auto).
(*16) Displayed as "DTS" on this unit.
(*17) Displayed as "DTS-HD" on this unit.
Comments
0 comments
Please sign in to leave a comment.