TX-8270-Playback with USB Storage Device

You can play music files stored on a USB storage device.  Perform the following procedure when the
unit is on.

1. Switch the input on the TV to that assigned to the unit
2. Plug your USB storage device with the music files into the USB port either on the front panel or rear panel of this unit
3. Press NET (a) on the remote controller to display the network service list screen
4. With the cursors on the remote controller, select "USB Front" "USB Rear", and then press ENTER (b)
   
   If the "USB" indicator flashes on the display, check whether the USB storage device is plugged in properly.
   
   Do not unplug the USB storage device while "Connecting···" is on the display. This may cause data corruption or malfunction.
5. Press ENTER on the remote controller again in the next screen. The list of folders and music files on the USB storage device are displayed. Select the folder with the cursors and press ENTER to confirm your selection.
6. With the cursors on the remote controller, select the music file, and then press ENTER to start playback.

• To return to the previous screen, press RETURN (c).
• The USB port of this unit conforms with the USB 2.0 standard. The transfer speed may be insufficient for some content you play, which may cause some interruption in sound.
• Note that operation is not guaranteed with all USB storage devices.
• This unit can use USB storage devices that comply with the USB mass storage device class standard. The unit is also compatible with USB storage devices using the FAT16 or FAT32 file system formats.