TX-8270-Multi-Zone Playback
You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2).
- DSD audio signals are not output to ZONE 2 with the "NET" input selector
- You can only select the same inputs for the main room and separate room with the "NET" or "BLUETOOTH" input selector. If you have "NET" selected in the main room and then select "BLUETOOTH" in the separate room, the main room also switches to "BLUETOOTH". You cannot select different stations for the main room and separate room with the DAB (European models)/AM (North American models)/FM radio.
- If ZONE 2 is on, power consumption during standby becomes larger than normal. Furthermore, RI linking features do not work.
- If ZONE 2 is turned on when Pure Audio is selected in the main room, it will automatically switch to Direct (European models).
Perform the following procedure when the unit is on.
- Press REMOTE MODE ZONE 2 (a) on the remote controller. The remote controller switches to the mode for controlling ZONE 2.
- Face the remote controller at this unit and press Í (c). The "Z2" indicator on the display lights.
- . Press the input selector (d) of the input you want to play in the separate room. On the main unit, after pressing ZONE 2, within 8 seconds turn the INPUT dial to select the input to be played in the separate room. To play the same source in the main room and separate room, press ZONE 2 on the main unit twice.
- Adjust the volume on the pre-main amplifier for the separate room.
To turn off the function:
Press the Power button while the remote controller is in the mode for controlling ZONE 2. Alternatively, press OFF on the main unit.
Playing in ZONE 2 only:
If you turn the unit to standby during multizone playback, the Z2 indicator is dimmed and the playback mode is switched to playback in a separate room only. Turning ZONE 2 on while the unit is in standby also switches the playback mode to playback in a separate room only.
Note
To return the remote controller to main room control mode: Press REMOTE MODE MAIN (b) on the
remote controller.
Comments
0 comments
Article is closed for comments.