You can configure advanced settings to have a more enjoyable experience with this unit.

Input/Output Assign

1. TV Out / OSD
   Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
2. HDMI Input
   Change input assignment between the input selectors and HDMI IN jacks.
3. Digital Audio Input
   Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks.
4. Analog Audio Input
   Change input assignment between the input selectors and AUDIO IN jacks.

Speaker

1. Configuration
   Change the settings of connection environment of the speakers.
2. Crossover
   Change the settings of crossover frequencies.
3. Distance
   Set the distance from each speaker to the listening position.
4. Level Calibration
   Adjust the volume level of each speaker.
5. Dolby Enabled Speaker
   Change the settings of Dolby Enabled Speakers.
6. Speaker Virtualizer
   The Speaker Virtualizer function can be switched between On and Off.

Audio Adjust

1. Multiplex/Mono
   Change the settings of multiplex audio playback.
2. Dolby
   Change the setting of when Dolby signals are input.
3. DTS
   Change the setting of when DTS signals are input.
4. LFE Level
   Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals.
5. Volume
   Change the Volume settings.

Source

1. IntelliVolume
   Adjust the volume level when there are differences in volume level among multiple devices connected to this unit.
   
   
2. Name Edit
   Set an easy name for each input.
   
   Audio Select
   Select the priority for input selection when multiple audio sources are connected to one input selector.
   
   Video Select
   When "TUNER" or "BLUETOOTH" input is selected, you can set the input from which video is
   displayed on the TV.

Hardware

1. HDMI
   Change the settings for the HDMI functions.
2. Bluetooth
   Change the settings for the Bluetooth function.
3. Power Management
   Change the settings for the power-save function.

Miscellaneous 

1. Tuner
   Change the frequency step for the tuner.
2. Firmware Update
   Change the settings for Firmware Update.
3. Initial Setup
   Make the initial setup from the setup menu.
4. Lock
   Lock the Setup menu so that the settings cannot be changed.

Menu Operations

Use the on-screen displays (OSD) that appear on the TV to make the settings.  Press on the remote controller to display the Setup menu.

Select the item with the cursors ^/v of the remote controller, and press ENTER to confirm your selection.

Use the cursors </> to change the default values.

• To return to the previous screen, press .
• To exit the settings, press .