Multiplex/Mono

Multiplex Input Channel

Default Value: Main

Setting Details

Set the audio channel or language to be output when playing multiplex audio or multilingual
broadcasts, etc.

"Main": Main channel only

"Sub": Sub channel only

"Main/Sub": Main and sub channels are output at the same time.

• For multiplex audio broadcasts, pressing the button on the remote controller will display "1+1" on the main unit’s display.

Mono Input Channel

Default Value: Left + Right

Setting Details

Set the input channel to play 2-ch digital sources such as Dolby Digital, or 2-ch analog/PCM sources in the Mono listening mode.

"Left": Left channel only

"Right": Right channel only

"Left + Right": Left and right channels

 

 

Dolby

Loudness Management

Default Value: On

Setting Details

When playing Dolby TrueHD, enable the dialog normalization function which keeps the volume of dialog at a certain level. Note that when this setting is Off, the Late Night function that allows you to enjoy surround at low volumes is fixed to off when playing Dolby Digital Plus/Dolby TrueHD.

"On": When this function is used

"Off": When this function is not used

 

DTS

DTS Auto Surround

Default Value: On

Setting Details

When inputting DTS signals that include extended channel information, the optimum listening mode is automatically selected according to the extended information contained in the input signal and the
speaker configuration of this unit when playing in the straight decoding listening mode.

"On": When this function is used

"Off": Audio is played using the same number of channels in the input signal according to the speaker configuration of this unit.

• If this function is set to "Off", the ES Matrix and ES Discrete listening modes cannot be selected.

Dialog Control

Default Value: 0 dB

Setting Details

You can increase the volume of dialog portion of the audio up to 6 dB by 1 dB step so that you can hear the dialog easily in noisy atmosphere.

• This cannot be set for content other than DTS:X.
• Depending on the content, this function may not be selected.

 

 

LFE Level

LFE Level

Default Value: 0 dB

Setting Details

Select the low-frequency effect (LFE) level of each signal from "0 dB" to "-∞ dB". If the low-frequency effect sound is too strong, select "-20 dB" or "-∞ dB".

 

 

Volume

Change the volume settings.

Mute Level

Default Value:-∞ dB

Setting Details

Set the volume lowered from the listening volume when muting is on. Select a value from "-∞ dB", "-40 dB" and "-20 dB".

 

Maximum Volume

Default Value: Off

Setting Details

Set the maximum value to prevent the volume from becoming too loud. Select a value from "Off", and "50" to "99".

 

Power On Volume

Default Value: Last

Setting Details

Set the volume level of when the power is turned on. Select a value from "Last" (Volume level before entering standby mode), "Min", "1" to "99" and "Max".

• You cannot set a higher value than that of "Maximum Volume".

Headphone Level

Default Value: 0 dB

Setting Details

Adjust the output level of headphones. Select a value between "-12 dB" and "+12 dB".