C-30 Basic Operation

Turning On CD Player                                                              

To turn on the CD Player, press the [ON/STANDBY] button on the unit or the remote controller. Press the [ON/ STANDBY] button again to set the CD Player to Standby.

Setting Auto Standby (ASb)                                                      

You can specify that if the CD Player is left stopped for 30 minutes, the power will automatically turn off, placing the unit in Standby mode (Auto Standby function). 

On the North American model: 

The default setting is “Off”. 

On the European model and China model: The default setting is “On”.

 Make settings for this function while playback is stopped. 

1. Press the [SETUP] button. 

2. Use the button to display “ASb”; then press the [ ENTER ] button.

3. Use the button to switch “Off”* or “On”; then press the [ ENTER ] button. 

*When set to off, power consumption increases as the power continues to turn on. 

4. “COMPLETE” appears on the display. 

Note:

If playback is paused, the power will remain on even after 30 minutes have elapsed; the Auto Standby function will not operate.