A-9030/9050-Using Headphones
Please use the following guide to connect headphones to the A-9030/A-9050 Integrated amplifier.
- Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the PHONES
jack- The SPEAKERS (A/B) LEDs will turn off
- You can adjust the volume and mute the sound, by using VOLUME ^/v
- While headphones are connected, no sound is output from the speakers and PRE OUT jacks
Please Note
- Always turn down the volume before connecting your headphones
- When headphones are connected, the SPEAKERS button cannot be used
If the headphone output is intermittent or there is no sound:
- This may be due to dirty contacts. Clean the headphones plug. See your headphones’ instruction manual for cleaning information
- Make sure that the headphones cable is not broken or damaged
Comments
0 comments
Article is closed for comments.