Turning On CD Player

To turn on the CD Player, press the POWER ON/STANDBY button on the unit or the remote controller. Press the POWER ON/STANDBY button again to set the CD Player to Standby.

Setting Auto Standby (ASb)

You can specify that if the CD Player is left stopped for 30 minutes, the power will automatically turn off, placing the unit in Standby mode (Auto Standby function).

On the North American model: The default setting is “Off”.
On the European model: The default setting is “On”.

Make settings for this function while playback is stopped.

1. Press the SETUP button
2. Use the < or > button to display “ASb”; then press the [ ENTER ] button.
3. Use the < or > button to switch “Off” or “On”; then press the [ ENTER ] button.
4. “COMPLETE” appears on the display.

Note:
If playback is paused, the power will remain on even after 30 minutes have elapsed; the Auto Standby function will not operate.

Changing the Display Brightness

Press the remote controller’s [DIMMER] button repeatedly to select the following options:

Using Headphones

Turn down the volume, then connect your stereo headphones to the [PHONES] jack.  You can adjust the volume by using the [PHONES LEVEL] knob.