MEMORY button: Used to register DAB (European models)/AM (North American models)/FM radio stations.
TUNING/PRESET button: Switch between the TUNING mode, where you select a frequency to tune to a station, and the PRESET mode, where you select a preset station.
Remote control sensor: Receives signals from the remote controller.
The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on the perpendicular axis and 30° to either side.
</- , +/> buttons: Use to tune to DAB (European models)/AM (North American models)/FM radio stations and select preset numbers.
Display
SPEAKER A/B button: Select the terminals to output audio from between SPEAKERS A/B.
DIRECT/TONE button: Switches between the DIRECT mode which outputs pure sound as it was intended, and the TONE mode which enables adjustments to the BASS and TREBLE.
Bluetooth indicator: Lights when the unit is connected by BLUETOOTH. It will flash during pairing or if the connection is not correct.
DISPLAY button: Switches the information on the display.
VOLUME
PHONES jack: Connect stereo headphones with a standard plug (Ø1/4z/6.3 mm).
INPUT buttons: Switches the input to be played. The input changes BD/DVD -> CBL/SAT -> LINE -> TV -> TUNER -> PHONO -> BLUETOOTH -> CD each time you press the > button.
BASS buttons: Adjusts the bass.
TREBLE buttons: Adjusts the treble.
BALANCE buttons: Adjusts the balance of the sounds output from the left and right speakers.
Display
The currently selected speaker system lights.
Lights when headphones are connected.
Lights when PCM signals are being input.
Lights in the following conditions.
PRESET: PRESET mode has been selected with TUNING/PRESET on the main unit. RDS (European models): Receiving RDS broadcasting. AUTO: When tuning mode is auto. 1TUNED2: Receiving DAB/AM/FM radio FM STEREO: Receiving FM stereo.
Flashes when muting is on.
DIGITAL: Lights according to the type of input digital audio signals.
Displays radio and a variety of other information.
Lights in the following conditions.
SLEEP: Sleep timer has been set. ASb: Auto Standby has been set. Hz: May light while "Tuner Setting" in the Setup menu is being set.
Comments
0 comments
Please sign in to leave a comment.