TX-RZ50 - Front Panel
Below, you will see an image of the front panel, as well as descriptions of the buttons/knobs on the front of the Onkyo TX-RZ50 AV Receiver.
- ON/STANDBY button
- PURE AUDIO button/indicator: Switches to the Pure Audio mode. The indicator lights up when the mode is on.
- HYBRID STANDBY indicator: Lights up when any of the following functions is working or enabled in standby state of this unit. When this indicator is lighting, the power consumption in standby state increases, however, the increase in power consumption is minimized by entering the HYBRID STANDBY mode where only the essential circuits operate.
- HDMI CEC
- HDMI Standby Through
- USB Power Out at Standby
- Network Standby
- Bluetooth Wakeup
- Display
- Remote control sensor: Receives signals from the remote controller.
- The reception range of the remote controller is within a distance of approx. 16´/5 m, and an angle of 20° in vertical direction and 30° to right and left.
- Input selector buttons: Switches the input to be played.
- ZONE 2/ZONE 3 buttons: Controls the multizone function.
- OFF button: Switches the multi-zone function off.
- LISTENING MODE button/dial: Press the LISTENING MODE button (above) to select a category from "Movie/TV", "Music" and "Game", and then turn the LISTENING MODE dial (below) to change the listening mode
- TONE button/dial: Adjusts the sound quality. Press the TONE button (above) to select an item to adjust from "Bass", "Vocal" and "Treble", and turn the TONE dial (below) to adjust.
- Front flap
- MASTER VOLUME
- SLEEP button: Sets the sleep timer. Select the time from "30 min", "60 min" and "90 min".
- MUSIC OPTIMIZER button: Turns on/off the MUSIC OPTIMIZER function that improves the quality of the compressed audio.
- HDMI OUT button: Select the HDMI OUT jack to output video signals.
- INFO button: Switches the information on the display.
- SETUP button: You can display advanced setting items on the TV and the display to have a more enjoyable experience with this unit.
- RETURN button: Returns the display to the previous state while setting.
- DIMMER button: Switches the brightness of the display with three levels. It cannot be turned off completely.
- MEMORY button: Used to register DAB (European models)/AM (North American, Australian and Asian models)/FM radio stations.
- TUNING MODE button: Used to switch between automatic tuning and manual tuning for AM/FM stations.
- WHOLE HOUSE MODE button: Enable the WHOLE HOUSE MODE function to play the same source in all rooms that are multi-zone connected.
- PHONES jack: Connect headphones with a standard plug (ø1/4″/6.3 mm).
- QUICK MENU button: Pressing this button during playback can make settings such as "HDMI" and "Audio" quickly on the TV screen while playing.
- Cursor buttons and ENTER button: Select an item with the cursors, and press ENTER to confirm your selection. When using TUNER, use them to tune in to stations.
- AUX INPUT HDMI jack: Connect a video camera, etc. using an HDMI cable.
- SETUP MIC jack: Connect the supplied speaker setup microphone.
Comments
1 comment
How do you take down the front panel
By hand correct?
Please sign in to leave a comment.