TX-RX50 - Display
Below, you will see an image, as well as descriptions of all the lights on the front display.
- Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode.
- Lights in the following conditions.
- Headphones: Headphones are connected.
- Z2/Z3: ZONE 2/ZONE 3 is on.
- Bluetooth: Connected by BLUETOOTH.
- WIFI: Connected by Wi-Fi.
- NET: Lights when connected to the network with the "NET" input selector. It will blink if incorrectly connected to the network.
- USB: Lights when the "NET" input selector is selected, a USB device is connected and the USB input is selected. It will blink if the USB device is not properly connected.
- HDMI: HDMI signals are input and the HDMI input is selected.
- DIGITAL: Digital signals are input and the digital input is selected.
- A: Audio is output only to ZONE A.
- B: Audio is output only to ZONE B.
- AB: Audio is output to both ZONE A and ZONE B.
- Lights according to the type of input digital audio signal and the listening mode.
- Lights in the following conditions. RDS (European, Australian and Asian models): Receiving RDS broadcasting. TUNED: Receiving DAB (European models)/AM (North American, Australian and Asian models)/ FM radio FM ST: Receiving FM stereo. SLEEP: Sleep timer is set. AUTO STBY: Auto Standby is set.
- Blinks when muting is on.
- Displays various information of the input signals.
- "DialogNorm: X dB" ("X" is a numerical value) may be displayed when software recorded in Dolby lineage or DTS lineage audio formats is played. For example, if "DialogNorm: +4 dB" is displayed, the source being played is recorded with 4 dB plus the THX standard level. If you play it with the THX standard level, lower the volume by 4 dB.
- Cursors: These may light when performing operations while “NET” is selected with the input selector. “Up” and “Down” light when there are multiple folders or files that are available to be selected. “Left” and “Right” light when text information does not fit with the range provided by “6”.
Comments
0 comments
Please sign in to leave a comment.