A-9150 - Setting the Auto Standby Function

You can set the impedance of the speakers that you connect to the unit (Default value is "8 Ω").

1. Press SETUP on the remote controller.
   
   SETUP does not work when MAIN IN input is selected. Select an input other than MAIN IN to operate.
   
   
2. Press D/C on the remote controller so the "D1" to "D4" and "LINE1" to "LINE4" LEDs flash.
   
   
3. Press B/A on the remote controller to switch the impedance.
   
   The flashing of the input source LEDs changes each time you change the setting.
   
   When using speakers with impedance of 4 Ω or more to less than 8 Ω:
   
   
   
   When using speakers with impedance of 8 Ω or more to less than 16 Ω:
   
   
   
   
4. Press SETUP on the remote controller.