Change the settings to connect with the Sonos Connect.

Input Selector

Default Value: -

Select the input selector to which the Sonos Connect is connected.

• Selecting "Off" disables the interlock function with Sonos.

Connected Device

Default Value: -

Displays the Sonos Connect connected to the same network as the network of this unit. Press the ENTER button to select the connected Sonos Connect.

• Products (e.g. Play:3 unequipped with an output terminal) other than the Sonos Connect are also displayed in the device list and selectable. In that case, when playback on the Sonos side starts, the input is switched, however, audio is not output. Select the room name of the connected Sonos Connect.
• Up to 32 devices can be displayed on the Sonos product list screen. If you cannot find the Sonos Connect to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again.
• To use this function, set "Input Selector" beforehand.

Preset Volume

Default Value: Main=Last

You can set the volume beforehand for playing back the Sonos Connect.  Select a value from "Last" (Volume level before entering standby mode), "Min", "0.5" to "99.5" and "Max".

• To use this function, set "Input Selector" beforehand.