TX-NR7100 - Web Setup
Menu Operations
You can make the settings for the network function of this unit using an Internet browser on a PC, smartphone, etc.
- Press on the remote controller to display the Setup menu.
- Select "5. Hardware" - "Network" with the cursors, and then take a note of the IP address displayed in "IP Address".
- Start the Internet browser on your PC, smartphone, etc. and enter the IP address of this unit in the URL field.
- The screen for entering the user name and password is displayed. Enter the following then click "OK".
User name: admin (fixed)
Password: admin (default value)
You can change the password after logging in.
Input is required again if you close the browser.
Take a note of the password so that you do not forget it. If you do forget it, reset the unit then log in again with the initial settings (admin). - Information for the unit (Web Setup screen) is displayed in the internet browser.
- After changing the settings, select "Save" to save the settings.
Device Information
You can change the Friendly Name or AirPlay Device Name, set an AirPlay Password, etc.
Control4: Register this unit if you are using a Control4 system.
Firmware Update: Select the firmware file you have downloaded to your PC so you can update this unit.
Network Setting
Status: You can see information for the network such as the MAC address and IP address of this unit.
Network Connection: You can select a network connection method. If you select "Wireless", select an access point from "Wi-Fi Setup" to connect.
DHCP: You can change DHCP settings. If you select "Off", set "IP Address", "Subnet Mask", "Gateway" and "DNS Server" manually.
Proxy: Display and set the URL for the proxy server.
Comments
0 comments
Please sign in to leave a comment.