GX-10DB- Bluetooth Playback

Pairing                                                                                             

1. Press the ON/STANDBY button to turn on the unit.

2. Press the BLUETOOTH button.
The LED Source Indicator blinks in blue, which shows the unit has entered the pairing standby mode.
・ When a BLUETOOTH-supported device has already been connected, cancel the               connection, or press and hold the BLUETOOTH button of the remote controller for           three seconds. Then the unit enters the pairing standby mode again.

3. Turn on the BLUETOOTH function of the BLUETOOTH-supported device.

4. Operate the BLUETOOTH-supported device, and select this unit.

・ When connecting multiple BLUETOOTH-supported devices, cancel the current connection, or press and hold the BLUETOOTH button of the remote controller for three seconds to let the unit enter the pairing standby mode. Then turn on the BLUETOOTH function of the next device.
・This unit can store the pairing information of up to 8 paired devices.

Playing Back                                                                                   

1. Press the ON/STANDBY button to turn on the unit.

2. Press the BLUETOOTH button.

3. Operate the BLUETOOTH-supported device, and play music.
Tips
・ The unit automatically turns on by operating the BLUETOOTH-supported device in standby mode to play music, etc.
・When no signal is detected for 15 minutes or longer, the unit automatically enters          the  standby mode.