A-50 Firmware Update

Disclaimer: The program and accompanying online documentation are furnished to you for use at your own risk. Our company will not be liable and you will have no remedy for damages for any claim of any kind whatsoever concerning your use of the program or the accompanying online documentation, regardless of legal theory, and whether arising in tort or contract. In no event will our company be liable to you or any third party for any special, indirect, incidental, or consequential damages of any kind, including, but not limited to, compensation, reimbursement or damages on account of the loss of present or prospective profits, loss of data, or for any other reason whatsoever.

 Note 

・For the latest firmware contents and the firmware version, visit  website.

 ・Do not turn off the power of the unit during update. 

・ Some of the products forcibly start update when connected to the network. When      all selector indicators are blinking, press the selector knob to start update. When        the update is complete, the unit automatically enters the standby state.

    1. The firmware is updated via the network using Onkyo Controller ( →p34).

         When the new firmware becomes available, a guidance is displayed on the                      screen of the app. Follow the onscreen instructions.

     2. The update progress status can be checked on the selector indicators. When the              update is approaching the end, all MY INPUT indicators and selector indicators                light up. Then after approx. three minutes elapse, the update is completed, and              the unit automatically enters the standby state.