P-80 General Specifications

North America and Japan models

 ■Amplifier Section THD+N (Total Harmonic Distortion + Noise) 

・0.008% (20 Hz - 20,000 Hz, Half power) 

Input Sensitivity and Impedance 

・200 mV/32 kΩ (LINE(RCA)) 

・4 mV,47 kΩ/0.4 mV,110Ω (PHONO MM/MC)

Rated RCA Output Level and Impedance 

・1 V/220 Ω (L/R PRE OUT)

 ・1 V/470 Ω (SUBWOOFER PRE OUT)

Rated XLR Output Level and Impedance 

・2 V/220 Ω (L/R PRE OUT) 

Phono Maximum Input Signal Voltage

・70 mV (MM 1 kHz 0.5%)

・7 mV (MC 1 kHz 0.5%) 

Frequency Response 

・10 Hz - 100 kHz/+1 dB, –3 dB (Direct)

Tone Control Characteristics 

・±10 dB, 20 Hz (Bass), ±10 dB, 20 kHz 

(Treble) Headphone Rated Output 

・80 mW + 80 mW (32 Ω, 1 kHz, 10% THD)

Supported impedance of Headphones 

・8 Ω - 600 Ω Headphones Frequency Response

・10 Hz - 100 kHz Input terminals Analog 

・4 (Including PHONO×1) 

Digital

 ・ 2 (COAXIAL×1, OPTICAL×1) 

*Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit. 

Output terminal

 Analog 

・3 (PRE OUT (RCA)×1, 

    PRE OUT (SUBWOOFER 1/2)×1, 

    PRE OUT (XLR)×1, ) 

・PHONES jack 

    Digital

 ・ 1 (OPTICAL×1)

       *Audio of "NET", "USB", and "Bluetooth" can be output from the digital optical                 output terminal. 

Note that DSD is not supported. 

・1 (HDMI (ARC)) 

Other terminals 

・Speaker terminal 

・12V TRIGGER OUT 

・GND terminal 

■General 

・ Power Supply 

AC 120 V, 60 Hz (North America model) 

AC 100V, 50/60 Hz (Japan model) 

・ Power Consumption 

35 W (North America model) 

25 W (Japan model) 

・ Network Standby (wired)

 1.7 W (North America model) 

1.6 W (Japan model) 

・ Network Standby (wireless) 

1.6 W (North America model) 

1.6 W (Japan model) 

・ Bluetooth Wakeup  

1.8 W (North America model) 

1.7 W (Japan model) 

・ HDMI CEC Standby 

0.1 W (North America model) 

0. 1 W (Japan model) 

- Standby mode (ALL ON) 

1.7 W (North America model) 

1.7 W (Japan model) 

・ Dimensions (W × H × D) 

435 mm × 135 mm × 355 mm 

17-1/8" × 5-5/16" × 14" 

・ Weight

    9.5 kg (20.9 lbs.)

Europe models

 ■Amplifier Section 

THD+N (Total Harmonic Distortion + Noise) 

・0.008% (20 Hz - 20,000 Hz, Half power) 

Input Sensitivity and Impedance 

・200 mV/32 kΩ (LINE(RCA)) 

・4 mV,47 kΩ/0.4 mV,110Ω (PHONO MM/MC) 

Rated RCA Output Level and Impedance

・1 V/220 Ω (L/R PRE OUT) 

・1 V/470 Ω (SUBWOOFER PRE OUT) 

Rated XLR Output Level and Impedance 

・2 V/220 Ω (L/R PRE OUT) Phono Maximum Input Signal Voltage 

・70 mV (MM 1 kHz 0.5%) 

・7 mV (MC 1 kHz 0.5%) Frequency Response 

・10 Hz - 100 kHz/+1 dB, –3 dB (Direct) 

Tone Control Characteristics 

・±10 dB, 20 Hz (Bass), ±10 dB, 20 kHz (Treble) 

Headphone Rated Output 

・80 mW + 80 mW (32 Ω, 1 kHz, 10% THD) 

Supported impedance of Headphones 

・8 Ω - 600 Ω Headphones Frequency Response 

・10 Hz - 100 kHz 

Input terminals

 Analog 

・4 (Including PHONO×1) 

Digital

 ・ 2 (COAXIAL×1, OPTICAL×1) 

     *Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32        kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit. 

Output terminal 

Analog 

・3 (PRE OUT (RCA)×1, PRE OUT (SUBWOOFER 1/2)×1, PRE OUT (XLR)×1, ) 

・PHONES jack 

Digital 

・ 1 (OPTICAL×1) 

      *Audio of "NET", "USB", and "Bluetooth" can be output from the digital optical                  output terminal. 

Note that DSD is not supported. 

・1 (HDMI (ARC)) 

Other terminals 

・Speaker terminal

・12V TRIGGER OUT

 ・GND terminal

 ■ General

 ・ Power Supply 

      AC 220-240 V, 50/60 Hz 

・ Power Consumption 35 W 

・ Network Standby (wired)

 1.8 W 

・ Network Standby (wireless) 

1.7 W 

・ Bluetooth Wakeup 

1.8 W 

・ HDMI CEC Standby 

0.2 W 

- Standby mode (ALL ON) 

1.9 W 

・ Dimensions (W × H × D) 

435 mm × 135 mm × 355 mm 

17-1/8" × 5-5/16" × 14" 

・ Weight 

9.5 kg (20.9 lbs.

Asia and Oceania models

 ■ Amplifier Section

 THD+N (Total Harmonic Distortion + Noise) 

・0.008% (20 Hz - 20,000 Hz, Half power) 

Input Sensitivity and Impedance 

・200 mV/32 kΩ (LINE(RCA)) 

・4 mV,47 kΩ/0.4 mV,110Ω (PHONO MM/MC) 

Rated RCA Output Level and Impedance 

・1 V/220 Ω (L/R PRE OUT) 

・1 V/470 Ω (SUBWOOFER PRE OUT)

Rated XLR Output Level and Impedance 

・2 V/220 Ω (L/R PRE OUT) 

Phono Maximum Input Signal Voltage 

・70 mV (MM 1 kHz 0.5%) 

・7 mV (MC 1 kHz 0.5%) 

Frequency Response 

・10 Hz - 100 kHz/+1 dB, –3 dB (Direct) 

Tone Control Characteristics 

・±10 dB, 20 Hz (Bass), ±10 dB, 20 kHz (Treble) 

Headphone Rated Output 

・80 mW + 80 mW (32 Ω, 1 kHz, 10% THD) 

Supported impedance of Headphones 

・8 Ω - 600 Ω 

Headphones Frequency Response 

・10 Hz - 100 kHz 

Input terminals 

Analog 

・4 (Including PHONO×1) Digital 

・ 2 (COAXIAL×1, OPTICAL×1) 

     *Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32        kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit.

Output terminal 

Analog 

・3 (PRE OUT (RCA)×1, PRE OUT (SUBWOOFER 1/2)×1, PRE OUT (XLR)×1, ) 

・PHONES jack 

Digital 

・ 1 (OPTICAL×1) 

*Audio of "NET", "USB", and "Bluetooth" can be output from the digital optical output terminal. Note that DSD is not supported. 

・1 (HDMI (ARC)) 

Other terminals 

・Speaker terminal 

・12V TRIGGER OUT 

・GND terminal 

■General 

・ Power Supply

 AC 220-240 V, 50/60 Hz 

・ Power Consumption 

35 W 

・ Network Standby (wired) 

1.8 W 

・ Network Standby (wireless) 

1.7 W 

・ Bluetooth Wakeup 

1.8 W 

・ HDMI CEC Standby 0.2 W 

- Standby mode (ALL ON) 

1.9 W 

・ Dimensions (W × H × D) 

435 mm × 135 mm × 355 mm 

17-1/8" × 5-5/16" × 14" 

・ Weight

 9.5 kg (20.9 lbs.) 

WLAN Module Model: 

AW-CM276NF 

Brand: AzureWave

NCC ID: CCAI17LP040AT4

Operation Frequency: 

WLAN 

2412-2462

5180-5240

5260-5320 

5500-5700 

5745-5825 

BT 2402-2480

Common to all destinations 

■Network Section 

Ethernet LAN 

・1 (10BASE-T/100BASE-TX) 

Wireless LAN 

・ IEEE 802.11 a/b/g/n/ac standard (Wi-Fi® standard) 5 GHz/2.4 GHz band ■BLUETOOTH Section Communication system 

・BLUETOOTH Specification version 5.1 Frequency band 

・2.4GHz (2.402-2.480GHz) Modulation method 

・FHSS (Frequency Hopping Spread Spectrum) 

Compatible BLUETOOTH profiles 

・A2DP 1.4, AVCTP 1.4, AVDTP 1.3, AVRCP 1.6.2 Supported Codecs 

・Receiving: SBC, AAC 

・Transmitting: SBC, aptX, aptX HD Transmission range (A2DP) 

・20 Hz - 20 kHz (Sampling frequency 44.1kHz) 

Maximum communication range 

・Line of sight approx. 15 m(*)

     (*)The actual range will vary depending on factors such as obstacles between                  devices, magnetic fields around a microwave oven,static electricity, cordless phone,        reception sensitivity, antenna's performance, operating system, software application,      etc. 

Maximum radio-frequency power transmitted in the frequency band(s) 

・2400 MHz - 2483.5 MHz (20 dBm (e.i.r.p)) 

・5150 MHz - 5350 MHz (23 dBm (e.i.r.p)) 

・5470 MHz - 5725 MHz (23 dBm (e.i.r.p)) 

■Music Server ( →p34) 

Supported Audio Formats MP3 (.mp3) 

・ MPEG-1/MPEG-2 Audio Layer-3/44.1 kHz, 48 kHz/ Between 8 and 320 kbps, and VBR/2 ch 

WMA (.wma) 

・ 44.1 kHz, 48 kHz/Between 5 and 320 kbps, and VBR/2 ch 

WAV (.wav) 

WAV files contain uncompressed PCM digital audio. 

・ 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz/8 bit, 16 bit, 24 bit/2 ch

 AIFF (.aiff/.aif)

AIFF files contain uncompressed PCM digital audio. 

・ 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz/8 bit, 16 bit, 24 bit/2 ch

 AAC (.aac/.m4a/.mp4/.3gp/.3g2) 

・ MPEG-2/MPEG-4 Audio/44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/Between 8 and 320 kbps, and VBR/2 ch 

FLAC (.flac) 

・ 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,192 kHz/8 bit, 16 bit, 24 bit/2 ch

 LPCM (Linear PCM) 

・ 44.1 kHz, 48 kHz/16 bit/2 ch 

Apple Lossless (.m4a/.mp4) 

・ 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,192 kHz/16 bit, 24 bit/2 ch 

DSD (.dsf/.dff) 

・ DSF/DSDIFF/2.8 MHz, 5.6 MHz, 11.2 MHz/2 ch 

■USB Storage Device ( →p27) Supported Audio Formats MP3 (.mp3) 

・ MPEG-1/MPEG-2 Audio Layer-3/44.1 kHz, 48 kHz/ Between 8 and 320 kbps, and VBR/2 ch 

WMA (.wma) 

・ 44.1 kHz, 48 kHz/Between 5 and 320 kbps, and VBR/2 ch 

WAV (.wav) 

WAV files contain uncompressed PCM digital audio. 

・ 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz/8 bit, 16 bit, 24 bit/2 ch 

AIFF (.aiff/.aif) 

AIFF files contain uncompressed PCM digital audio. 

・ 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz/8 bit, 16 bit, 24 bit/2 ch

 AAC (.aac/.m4a/.mp4/.3gp/.3g2) 

・ MPEG-2/MPEG-4 Audio/44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/Between 8 and 320 kbps, and VBR/2 ch 

FLAC (.flac) ・ 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,192 kHz/8 bit, 16 bit, 24 bit/2 ch 

Apple Lossless (.m4a/.mp4) 

・ 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,192 kHz/16 bit, 24 bit/2 ch 

DSD (.dsf/.dff) 

・ DSF/DSDIFF/2.8 MHz, 5.6 MHz, 11.2 MHz/2 ch