A-9010 - Setting the Auto-Standby Function

This unit will go into standby mode automatically with following conditions when the Auto Standby is set to On. If you do not have this setting on, you will need to manually power on the amplifier before use - A-9010-Turning the Unit On

• When there is no audio in the currently selected input source and this unit is not operated for approximately 20 minutes
• (North American and Continental European models) When there is no PCM signal input in D 1 or D 2 and this unit is not operated for approximately 20 minutes, the default Auto Standby setting is set as follows:
  • (North American models) Off
  • (Others) On

• The setting can be changed with following procedure:
  • Press and hold the (1) ON/STANDBY button while the power is in standby
  • The power will come on when the button is pressed, but keep on pressing the button
  • The setting for the Auto Standby is changed, and it will be displayed as follows (North American and Continental European models):
    • On: D 1 LED will blink for approximately 2 seconds
    • Off: D 2 LED will blink for approximately 2 seconds
    • (UK models)
      • On: ASB LED will light up
      • Off: ASB LED will go off