TX-8260-Front Panel Layout
- POWER ON/STANDBY button
- MENU button: Used to display the menu.
MEMORY button: Used to register AM/FM radio stations. - Play (1)/Pause (;) button, TUNING MODE button:
-Used for play operations when playing Music Server or USB.
- Switches tuning to an AM/FM station between automatic tuning and manual tuning - HYBRID STANDBY indicator: Lights if the unit enters standby mode when the features such as NET Stby are enabled that continue to work when this unit is in standby.
- Remote control sensor: Receives signals from the remote controller.
-The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on the perpendicular axis and 30° to either side. - ZONE 2 button: Controls the multi-zone function.
- OFF button: Switches the multi-zone function off.
- Display
- SETUP button: You can show advanced setting items on the display to provide you with an even better experience.
- Cursors (D / C / B / A), ENTER button: Select the item with the cursors and press ENTER to confirm. Use them to tune to stations when using TUNER.
- RETURN button: Returns the display to the previous state during setting.
- VOLUME
- PHONES jack: Connect stereo headphones with a standard plug (Ø1/4"/6.3 mm diameter).
- DIMMER button: You can adjust the brightness of the display in three steps. It cannot be turned off completely.
- SPEAKER A/B button: Select the terminals to output audio from between SPEAKERS A/B.
- INPUT dial: Switches the input to be played. Turn the control to switch the source in the following order; BD/DVD#CBL/SAT#PC#GAME# TVTAPE#CD#PHONO#AM#FM#NET# BLUETOOTH
- BASS dial: Adjusts the bass.
- TREBLE dial: Adjusts the treble.
- BALANCE dial: Adjusts the balance of the sounds output from the left and right speakers.
- BGM 1/2/3/4 buttons: Preset your favorite internet radio or AM/FM radio stations.
- USB jack: A USB storage device is connected so that music files stored in it can be played. You can also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.
-When connecting a HDD that requires more than 5 V/0.5 A, connect to the USB port (maximum 5 V/1 A) on the rear of the unit.
Display Layout
- The currently selected speaker system lights.
- Lights in the following conditions:
: When headphones are connected
Z2: ZONE 2 is on.: When connected via BLUETOOTH
: When connected by Wi-Fi
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network is
not correct.
USB: When "NET" is selected with the input selector and the unit is connected by USB and the USB device is selected. Flashes if the USB is not properly connected.
DIGITAL: Digital signals are input and the digital input selector is selected. - Lights according to the type of input digital audio signals.
- Lights in the following conditions:
TUNED: Receiving AM/FM radio
FM ST: Receiving FM stereo.
SLEEP: Sleep timer has been set.
AUTO STBY: Auto Stby has been set. - Flashes when muting is on.
- Speaker/Channel display: Displays the output channel of the speakers.
- This may light when performing operations with the "NET" input selector.
- Displays various information of the input signals.
Comments
0 comments
Please sign in to leave a comment.