TX-8260-Rear Panel Layout
- DIGITAL IN OPTICAL/COAXIAL jacks: Input digital audio signals from an external device with a digital optical cable or digital coaxial cable.
- REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit.
- USB jack: A USB storage device is connected so that music files stored in it can be played. You can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.
- ETHERNET jack: Connect to the network with an Ethernet cable.
- Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH wireless technology enabled device. Adjust their angles according to the connection status.
- IR IN/OUT terminals: Connected to the multi-room remote control kit. Special devices or cables are necessary. For more information about preparation, contact the specialized stores.
- Power cord
- GND jack: The ground wire of the turntable is connected.
- FM 75 Ohm/AM ANTENNA jacks: Connect the supplied FM indoor antenna and AM indoor
antenna. - LINE IN jacks: Input audio signals from an external device with an analog audio cable.
- LINE OUT jacks: Connect a recording device, such as a cassette tape deck. Connect to the LINE IN jacks on the recording device using analog audio cable.
- SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.
- ZONE 2 PRE OUT jacks: Output audio signals with an analog audio cable to a pre-main amplifier or power amplifier in a separate room (ZONE 2).
- SPEAKERS jacks: Connect speakers with speaker cables. You can connect a set of left and right speakers to each of the A/B terminals. (This unit is banana plug ready)
Comments
0 comments
Please sign in to leave a comment.