A-9110-Subwoofer Output Settings

This unit enables you to choose the subwoofer output mode, with the choices being "Auto" (default setting), "On", and "Off".

Auto : The subwoofer signal is not output when the DIRECT function is on.
On : The subwoofer signal is always output.
Off : The subwoofer signal output is stopped, and the effect on sound quality can be moderated within the unit. It is recommended to set this off if you are not using a subwoofer.

• There is no audio output from the subwoofer when headphones are connected, irrespective of the setting.

1. Press SETUP on the remote controller.
   
2. Press ^/v  on the remote controller several times so that some input source indicators, such as "LINE 1" and "LINE 2", light on the unit.
   
   
   
   The indicators light and the current setting is displayed.
   
   
   
3. Press </> on the remote controller to change the setting.
   
   
   - Auto (default value): "LINE 1" and "LINE 2" indicators light
   - On: "LINE 1", "LINE 2" and, "LINE 3" indicators light
   - Off: "LINE 1", "LINE 2", "LINE 3", and "LINE 4" indicators light
   
   
4. To exit the settings, press SETUP.
   
   The setting mode ends after 5 seconds elapse with no operations performed.