A-9110-Setting Auto Standby

When automatic standby is on, the unit automatically switches to standby mode after 20 minutes of no audio input without any operations (Default value: North American models are "Off", others are "On".).

1. Press SETUP on the remote controller.
   
2. Press ^/v on the remote controller several times to make the "DIRECT" and "PHASE MATCHING BASS" indicators either blink or light.
   
   The indicators blink or light and the current setting value is displayed.
   
   
   
3. Press B/A on the remote controller to switch auto standby on or off.
   
   - On: "DIRECT" and "PHASE MATCHING BASS" indicators are blinking
   - Off: "DIRECT" and "PHASE MATCHING BASS" indicators light
   
   
4. To exit the settings, press SETUP.

• The setting mode ends after 5 seconds elapse with no operations performed.
• 60 seconds before switching to standby mode, the input source indicator for the currently selected source starts blinking.
• Depending on the connected device, the auto standby feature may not engage due to factors such as noise.