M-5010-Connecting Your Speakers
Please Note
- Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive (+) terminals, and negative (–) terminals only to negative (–) terminals. If you get them the wrong way around, the sound will be out of phase and will feel unnatural.
- Be careful not to short the positive and negative wires. Doing so may damage the power amplifier.
- Make sure the metal core of the wire does not have contact with the power amplifier’s rear panel. Doing so may damage the power amplifier.
- Don’t connect more than one speaker wire to a single speaker terminal. Doing so could damage the power amplifier or cause it to malfunction.
Screw-Type Speaker Terminals
Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown.
Banana Plugs
- If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.
- Do not insert the speaker code directly into the center hole of the speaker terminal.
Comments
0 comments
Please sign in to leave a comment.