M-5010-Setting the Speaker Impedance

You can set the impedance of the speakers that you connect to the unit.

1. Switch the SPEAKER IMPEDANCE selector on the unit’s rear panel.

• [4 Ohms or more and less than 8 Ohms]
  Sets the impedance to 4 Ohms.
• [8 Ohms or more and 16 Ohms or less]
  Sets the impedance to 8 Ohms. (default)

Caution

• Settings will not be enabled even when the selector is changed in the Standby mode.  To change a setting, be sure to turn on the unit prior to making any changes.