HT-S3910 - Setup Menu - Input/Output Assign
Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
- 1080p -> 4K Upscaling
- Default Value: Off
- Setting Details
When using a TV that supports 4K, video signals input at 1080p can be automatically upscaled to 4K for output.
"Off": When this function is not to be used
"Auto": When this function is to be used
"Select "Off" if your TV does not support 4K
- Super Resolution
- Default Value: 2
- Setting Details
When you have set "1080p -> 4K Upscaling" to "Auto", you can select the degree of video signal correction from "Off" and between "1" (weak) and "3" (strong).
- OSD Language
- Default Value: English
- Setting Details
Select the on-screen display language from the following:
(North American models) English, German, French, Spanish, Italian, Dutch, Swedish (European, Australian, Asian and Taiwanese models) English, German, French, Spanish, Italian, Dutch, Swedish, Russian, Chinese
- Impose OSD
- Default Value: On
- Setting Details
Set whether or not to display information such as volume adjustment or switching of input on the TV screen.
"On": OSD is displayed on the TV
"Off": OSD is not displayed on the TV
OSD may not be displayed depending on the input signal even if "On" is selected. In this case, change the resolution of the connected device.
- Mini Player OSD
- Default Value: Always On
- Setting Details
You can display on the TV the images from another input selected last while playing the audio from BLUETOOTH input. After switching the input to BLUETOOTH, play the images and audio. And then when you press MODE on the remote controller, the image is displayed in full-screen mode, and the audio information (Mini Player) for BLUETOOTH is displayed in the corner of the screen. You can set whether to always display this Mini Player on the screen.
"Always On": The Mini Player is always displayed
"Auto Off": The Mini Player turns off automatically in 30 seconds after displayed. If operation such as changing the volume is performed, it is displayed again for 30 seconds.
- Each time the MODE button is pressed, the image display/non-display can be switched.
- This setting cannot be selected if "Impose OSD" is set to "Off".
- When "OSD Language" is set to Chinese, this function cannot be used. (European, Australian, Asian and Taiwanese models)
- Screen Saver
- Default Value: 3 Minutes
- Setting Details
Set the time to start the screen saver. Select a value from "3 minutes", "5 minutes", "10 minutes" and "Off".
Comments
0 comments
Please sign in to leave a comment.