TX-NR696 - Multi-Zone Playback
You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different sources can be played back in both rooms.
- For the "NET" or "BLUETOOTH" input selector, you can select only the same source for the main room and separate room.
- If you select "NET" in the main room and then select "BLUETOOTH" in the separate room, the main room setting switches to "BLUETOOTH".
- You cannot select different stations of AM/FM broadcasts for the main room and separate room.
- DSD audio signals cannot be output to ZONE 2 with the "NET" input selector.
- If ZONE 2 is on, power consumption during standby will increase.
- If ZONE 2 is turned on when the Pure Audio listening mode is selected in the main room, the mode will automatically switch to the Direct listening mode(European, Australian, Taiwanese and Asian models).
In remote controller operation, while pressing and holding the ZONE 2 SHIFT button, press other buttons for operation.
1. While pressing and holding the ZONE 2 SHIFT button on the remote controller, point the remote controller at this unit and press .
- "Z2" on the display of the main unit lights up.
2. While pressing and holding the ZONE 2 SHIFT button on the remote controller, press the input selector of the input source you want to play in the separate room. To control on the main unit, press the ZONE 2 button, and then within 8 seconds, press the input selector button of the input to be played in the
separate room. To play the same source in the main room and separate room, press the ZONE 2 button of the main unit twice.
3. When using the ZONE 2 LINE OUT connection, adjust the sound volume on the pre-main amplifier in the separate room. For the ZONE speaker output, while pressing and holding the ZONE 2 SHIFT button on the remote controller, adjust the volume with the volume button. To do this on the main unit, press
the ZONE 2 button, and then within 8 seconds, adjust the volume using the MASTER VOLUME dial.
To turn off the function:
Press the Power button while the remote controller is in the mode for controlling ZONE 2. Alternatively, press OFF on the main unit.
Playing in ZONE 2 only:
If you turn the unit to standby during multizone playback, the Z2 indicator is dimmed and the playback mode is switched to playback in a separate room only. Turning ZONE 2 on while the unit is in standby also switches the playback mode to playback in a separate room only.
Comments
0 comments
Please sign in to leave a comment.