TX-NR696 - Menu Operations: Speakers
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press [SETTING/GEAR] on the remote controller to display the Setup menu.
Select the item with the cursors of the remote controller, and press ENTER to confirm your selection.
Use the cursors to change the default values.
- To return to the previous screen, press [BACK ICON].
- To exit the settings, press [SETTING].
Configuration
Change the settings of connection environment of the speakers.
Crossover
Change the settings of crossover frequencies.
- As for the THX-certified speakers, the following settings are recommended.
– Crossover frequency → "80 Hz(THX)"
– "LPF of LFE" → "80 Hz"
– "Double Bass" → "Off"
Distance
Set the distance from each speaker to the listening position.
- Default values vary depending on the regions.
- The unit of distance can be changed by pressing the MODE button on the remote controller. When using the unit "feet", the setting is available in increments of 0.1 ft from 0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of 0.03 m from 0.03 m to 9.00 m.
Level Calibration
Adjust the volume level of each speaker.
Dolby Enabled Speaker
Change the settings of Dolby Enabled Speakers.
- This setting can be selected when "Configuration" - "Height Speaker" is set to "Dolby Speaker".
Equalizer Settings
You can adjust the output volume of the range for each connected speaker.
Adjust the volume of different sound ranges for each speaker. You can set three different equalizers in Preset 1 to 3. The number of frequencies that can be selected for each speaker is up to five bands for the Subwoofer and nine bands for the other speakers.
- Depending on the input source or listening mode setting, the desired effect may not be achieved.
THX Audio
Change the THX Audio settings.
Speaker Virtualizer
The Speaker Virtualizer function can be switched between On and Off.
Comments
0 comments
Please sign in to leave a comment.