TX-NR696 - Menu Operations: Hardware
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press [SETTING/GEAR] on the remote controller to display the Setup menu.
Select the item with the cursors of the remote controller, and press ENTER to confirm your selection.
Use the cursors to change the default values.
- To return to the previous screen, press [BACK].
- To exit the settings, press [SETTING].
HDMI
Change the settings of the HDMI function.
Network
Change the settings of the Network function.
- When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each components, you must set "DHCP" to "Disable", assign an address to this unit in the "IP Address" setting, and set information related to your LAN, such as Subnet Mask and Gateway.
- Wait for a while if "Network" cannot be selected. It can be selected when the network
function is activated.
Bluetooth
Change the settings for the Bluetooth function.
- Wait for a while if "Bluetooth" cannot be selected. It can be selected when the BLUETOOTH function is activated.
Power Management
Change the settings for the power-save function.
Works with SONOS
Change the settings to connect with the Sonos Connect.
Comments
0 comments
Please sign in to leave a comment.