HT-S3910 - Setup Menu - Hardware - Bluetooth
Bluetooth
Default Value: On
Setting Details
Select whether or not to use the BLUETOOTH function.
"On": Enables connection with a BLUETOOTH enabled device by using the BLUETOOTH function.
Select "On" also when making various BLUETOOTH settings.
"Off": When not using the BLUETOOTH function
Auto Input Change
Default Value: On
Setting Details
When a BLUETOOTH-enabled device is played while it is connected to the unit, the input of the unit can be automatically switched to "BLUETOOTH".
"On": The input is automatically set to "BLUETOOTH" responding to the playback operation of the BLUETOOTH-enabled device.
"Off": The function is disabled.
- If the input is not switched automatically, set this to "Off", and change the input manually.
Auto Reconnect
Default Value: On
Setting Details
This function automatically reconnects to the BLUETOOTH-enabled device connected last when you change the input to "BLUETOOTH".
"On": When this function is used
"Off": When this function is not used
- This may not work with some BLUETOOTH enabled devices.
Pairing Information
Default Value: -
Setting Details
You can initialize the pairing information stored on this unit. Pressing ENTER when "Clear" is displayed
initializes the pairing information stored on this unit.
- This function does not initialize the pairing information on the BLUETOOTH-enabled device. When pairing the unit again with the device, be sure to clear the pairing information on the BLUETOOTH-enabled device beforehand. For information on how to clear the pairing information, refer to the instruction manual of the BLUETOOTH-enabled device.
Device
Default Value: -
Setting Details
Displays the name of the BLUETOOTH-enabled device connected to the unit.
- The name is not displayed when "Status" is "Ready" and "Pairing".
Status
Default Value: -
Setting Details
Displays the status of the BLUETOOTH-enabled device connected to the unit.
"Ready": Not paired
"Pairing": Paired
"Connected": Successfully connected
• Wait for a while if "Bluetooth" cannot be selected. It can be selected when the BLUETOOTH function is activated.
Comments
0 comments
Please sign in to leave a comment.