HT-S3910 - Setup Menu - Hardware - Power Management
Change the settings for the power-save function.
Sleep Timer
Default Value: Off
Setting Details
You can allow the unit to enter standby automatically when the specified time elapses. Select a value from "30 minutes", "60 minutes" and "90 minutes".
"Off": The unit does not automatically enter standby mode.
Auto Standby
Default Value: On/Off
Setting Details
This setting allows the unit to enter standby mode automatically after 20 minutes of inactivity without any video or audio input. (When "USB Power Out at Standby" is enabled, the unit enters the HYBRID STANDBY mode which minimizes the increase in power consumption.)
"On": The unit automatically enters standby mode ("AUTO STBY" lights up).
"Off": The unit does not automatically enter standby mode.
- "Auto Standby" is displayed on the main unit’s display and TV screen 30 seconds before entering standby mode.
- Default values vary depending on the regions.
Auto Standby in HDMI Standby Through
Default Value: Off
Setting Details
Enable or disable "Auto Standby" while "HDMI Standby Through" is on.
"On": The setting is enabled.
"Off": The setting is disabled.
- This setting cannot be set to "On" if "Auto Standby" and "HDMI Standby Through" are set to "Off".
USB Power Out at Standby
Default Value: Off
Setting Details
When this function is set to "On", electricity can be supplied to the Streaming media player connected to the POWER OUT port even if this unit is in standby mode .
- The POWER OUT jack is cannot supply power to smart phones/tablets or other devices.
- While using this function, power consumption increases in standby mode, however, the
increase in power consumption is minimized by automatically entering the HYBRID STANDBY mode where only the essential circuits are operating.
Comments
0 comments
Please sign in to leave a comment.