TX-NR7100 - Connecting a TV
By connecting a TV to this unit, you can show the video from AV devices connected to this unit on the TV and also play the sound from the TV through this unit.
To ARC/eARC TV
If the TV supports the ARC (Audio Return Channel) function(*), use only the
HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of
the TV for connection. You connect the HDMI cable to the HDMI OUT MAIN jack
labeled "ARC" on the receiver side.
- When a TV compatible with the eARC function is connected, use an HDMI cable that supports Ethernet.
To Non-ARC TV
If the TV does not support the ARC (Audio Return Channel) function(*), connect an HDMI cable and digital optical cable. If the TV does not have a DIGITAL OPTICAL OUT jack, you can use an analog audio cable to connect with the AUDIO IN TV jack.
- If you use a cable set-top box, etc. connected to the input jack of this unit to
watch TV (without using a TV’s built-in tuner), connection with a digital optical
cable or analog audio cable is not required.
Setup
- When not using the ARC function, press on the remote controller, then set "5.Hardware" - "HDMI" - "Audio Return Channel (eARC supported)" to "Off". (*)The ARC function and eARC function transmit the audio signals of the TV via an HDMI cable, and plays the audio of the TV on this unit. To check if the TV supports the ARC function and eARC function, refer to the instruction manual
of the TV, etc. ARC/eARC compatible audio formats. - Settings are required when 4K or 8K high-quality video is to be played. Refer to "HDMI 4K/8K Signal Format" for information on the settings. Also, use an HDMI cable that supports 4K or 8K video.
Comments
2 comments
What is the best HDMI cable for sobly atmos signal
Hello Uday,
The supported spec for Dolby Atmos would HDMI 2.0 or HDMI 2.1. Unfortunately we don't have specific brands that we would recommend but that is specification for the HDMI for the Atmos listening mode.
Thank you,
Jennifer
Please sign in to leave a comment.