Multiplex/Mono

Change the settings of multiplex audio playback.

Multiplex Input Channel

Default Value: Main
Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc.

• For multiplex audio broadcasts, pressing the button on the remote controller will display "1+1" on the main unit’s display.

 

Mono Input Channel

Default Value: Left + Right

Set the input channel when playing back analog or 2 ch PCM signals in the Mono listening mode.

 

Mono Output Speaker

Default Value: Center

Set the speaker to output monaural audio in the Mono listening mode.

• If an item cannot be selected even though connection is correct, check that the settings in "2. Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels.

 

Dolby

Change the setting of when Dolby signals are input.

 

Loudness Management

Default Value: On
When playing Dolby TrueHD, enable the dialog normalization function which keeps the volume of dialog at a certain level. Note that when this setting is Off, the Late Night function that allows you to enjoy surround at low volumes is fixed to off when playing Dolby Digital Plus/Dolby TrueHD.

 

 

Center Spread

Default Value: Off

Adjust the width of the front sound field created when playing back with the Dolby Audio - Surr listening mode.

• Depending on the speaker settings, "Off" is applied.

 

DTS/IMAX

Change the setting of when DTS signals are input.

DTS Auto Surround

Default Value: On

When inputting DTS signals that include extended channel information, the optimum listening mode is automatically selected according to the extended information contained in the input signal and the speaker configuration of this unit when playing in the straight decoding listening mode.

 

Dialog Control

Default Value: 0 dB

You can increase the volume of dialog portion of the audio up to 6 dB by 1 dB step so that you can hear the dialog easily in noisy atmosphere.

• This cannot be set for content other than DTS:X.
• Depending on the content, this function may not be selected.

IMAX Mode

Default Value: Auto

Set the IMAX sound mode.

 

IMAX User Setting

Default Value: Auto

When playing IMAX content with the IMAX sound mode, select whether to automatically apply the speaker setting recommended by IMAX or to set it manually.

• This cannot be selected when the IMAX Mode is "Off".

 

IMAX Bass Feeding

Default Value: On

Set the route for the bass component of the audio.

• This cannot be selected when the "IMAX User Setting" is "Auto".

 

IMAX LFE Level

Default Value: 0 dB

• This cannot be selected when the "IMAX User Setting" is "Auto".

 

LFE Level

Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals.

LFE Level

Default Value: 0 dB

 

Volume

Change the Volume settings.

 

Volume Display

Default Value: Absolute

Switch the volume display between the absolute value and relative value. The absolute value 82.0 is equivalent to the relative value 0.0 dB.

 

Mute Level

Default Value: -∞ dB

 

Maximum Volume

Default Value: Off

 

Power On Volume

Default Value: Last

 

Headphone Level

Default Value: 0.0 dB