TX-SR393 - Rear Panel Layout
1. HDMI OUT jacks: Transmit video signals and audio signals with an HDMI cable connected to a TV.
2. HDMI IN jacks: Transmit video signals and audio signals with an HDMI cable connected to an AV component.
3. POWER OUT port: The power (5 V/1 A) can be supplied to a streaming media player, etc. using a USB cable The playback function is not supported.
4. Power cord
5. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable.
6. TUNER AM/FM terminal: Connect the supplied antennas.
7. AUDIO IN jacks: Input TV or AV component audio signals with an analog audio cable.
8. ZONE B LINE OUT jacks: Output audio signals with an analog audio cable connected to a pre-main amplifier in a separate room (ZONE B).
9. SUBWOOFER PRE OUT jacks: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack.
10. SPEAKERS terminals: Connect speakers with speaker cables. (FRONT L/R terminals of North American models support banana plugs, the center and surround terminals take bare wire connection.)
Comments
2 comments
스피커 레벨조정 할때
서라운드 L 동작시 센터 스피커에서도 소리가 들립니다.
Hello 풍기
If you are getting audio crossing, I would suggest to check your speakers wires that there is no crossing or any of the wires laying top of each other. If they all check out then the next would be to reset the receiver.
If after resetting doesn't work then it may have to go to service or to your dealer.
Thank you
Jennifer
Please sign in to leave a comment.