DX-C390 - Powering the Unit On

Before connecting the power cord and turning on the DX-C390, connect all your AV components first.  Don’t forget to turn on your amp, and select the audio input to which the DX-C390 is connected.

1. Connect the power cord to a suitable wall outlet.
   
   
2. Press the [STANDBY/ON] button or the remote controller’s [ON] button.
   
   The DX-C390 comes on, the display lights up, the disc tray light comes on, and the STANDBY indicator goes off. 
   
   When the DX-C390 is turned on, it checks the carousel for discs and selects the first disc that it finds. 
   
   To set the DX-C390 to Standby, press the [STANDBY/ON] button or the remote controller’s [STANDBY] button.
   
   Note:
   You can turn on the DX-C390 and simultaneously open the disc tray or start playback simply by pressing the OPEN/CLOSE [ ] button or the PLAY [] button respectively. The DX-C390 will take a little longer to come on.