1. To open the disc tray, press the [ ] button.  Put a disc, label-side up, into each disc bay.
   
2. To access the other disc bays, use the [DISC SKIP] button or the remote controller’s DISC [+] and [–] buttons.
   
   
3. To close the disc tray, press the [ ] button again.
   
   A circle appears around the number of the current disc

Notes:

The DX-C390 supports 8 cm and 12 cm discs. To avoid damaging your discs or DX-C390, be sure to put discs in the centers of the disc bays.

• Only load discs that are supported by the DX-C390.
• To avoid personal injury, keep your hands away from the disc tray as it closes.
• Always use the EJECT button to open and close the disc tray. Never push the disc tray, and don’t touch or obstruct it while it’s opening or closing. Don’t press down on the disc tray while it’s open. Doing so may damage your discs or DX-C390.

Loading Discs During Playback

This section explains how to load discs without stopping playback.

1. To open the disc tray, press the EJECT button.
   
   The disc that’s currently playing remains inside the DX-C390 and its disc bay is empty and won’t come to the front.
   
   
2. Load or remove your discs, and use the [DISC SKIP] button or the remote controller’s DISC [+] and
   [–] buttons to access the other disc bays.
   
   
3. To close the disc tray, press the [ ] button again.
   
   Playback of the current disc continues uninterrupted until you stop playback or select another disc.
   
   Tip:
   
   If you press one of the DISC SELECT buttons, the disc tray will close, and playback of the newly selected disc will start automatically.

Note:

The DX-C390 cannot play the next disc while the disc tray is open. Be sure to close the disc tray as soon as you’ve finish loading discs.