TX-SR494 - Connecting the TV
Please use the following instructions to connect your TV to the TX-SR494 AV Receiver.
Connection with the TV differs depending on whether the TV supports the ARC (Audio Return Channel) function or not. The ARC function transmits the audio signals of the TV via an HDMI cable, and plays the audio of the TV on this unit. To check if the TV supports the ARC function, refer to the instruction manual of the TV, etc.
To ARC TV
If the TV supports the ARC (Audio Return Channel) function, use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection.
Setup
- Settings are required to use the ARC function. Select "Yes" for "3. ARC Setup" in Initial Setup. If "No, Skip" is selected, settings are required in the Setup menu after Initial Setup is completed. Press on the remote controller, and set "5. Hardware" - "HDMI" - "Audio Return Channel" to "On".
- For detailed settings for TV connection, CEC function and audio output, refer
to the instruction manual of the TV.
To Non-ARC TV
If the TV does not support the ARC (Audio Return Channel) function, connect an HDMI cable and digital optical cable.
- If you use a cable set-top box, etc. connected to the input jack of this unit to watch TV (without using a TV’s built-in tuner), connection with a digital optical cable or analog audio cable is not required.
Comments
0 comments
Please sign in to leave a comment.