TX-SR494 - Connecting an AV Component with HDMI
Use the following instructions to connect an AV component to the TX-SR494 AV Receiver using a HDMI cable.
This is a connection example of an AV component equipped with an HDMI jack.
When connecting with an AV component that conforms to the CEC standard, you can use the HDMI CEC function that enables linking with input selectors, etc. and the HDMI Standby Through function that can transmit video and audio signals of the AV component to the TV even if this unit is in standby mode.
Setup
- The HDMI CEC function and HDMI Standby Through function are automatically enabled if you select "Yes" for "3. ARC Setup" in Initial Setup.
- If "No, Skip" is selected, settings are required in the Setup menu after Initial Setup is completed. Press on the remote controller, and select "5. Hardware" - "HDMI" to make the settings.
- To enjoy digital surround sound including Dolby Digital, set the audio output of the connected Blu-ray Disc player etc. to the Bitstream output.
The POWER OUT port on the rear panel can supply power (5 V/1 A) to a streaming media player, etc. using a USB cable.
- To supply power even when this unit is in standby mode, change the setting value of "USB Power Out at Standby" to "On".
Comments
0 comments
Please sign in to leave a comment.