TX-SR494 - Multi-Zone and Antenna Connection
The following describes multi-zone and antenna connection with the TX-SR494 AV Receiver.
Multi-Zone Connection
While performing playback in the main room (ZONE A), you can enjoy 2-ch audio of the same source in the separate room (ZONE B) at the same time
Use an analog cable to connect the ZONE B PRE/LINE OUT jack of this unit and the LINE IN jack of the pre-main amplifier or power amplifier in the separate room.
Setup
- When connecting the power amplifier, set "Zone B Output Level" to "Variable" for "Speaker Setup" in the Initial Setup section.
- When setting "Zone B Output Level" from the Setup menu, press on the remote controller, and set
"2. Speaker" - "Configuration" - "Zone B Output Level" to "Variable". - If it is not set, a large volume is output and the power amplifier, speakers, etc. may be damaged.
Antenna Connection
Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals.
Attach the indoor FM antenna to the wall using push pins or adhesive tape.
Comments
0 comments
Please sign in to leave a comment.