TX-SR494 - Menu Operations: Speakers
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press [SETTING/GEAR] on the remote controller to display the Setup menu.
Select the item with the cursors of the remote controller, and press ENTER to confirm your selection.
Use the cursors to change the default values.
- To return to the previous screen, press [BACK ICON].
- To exit the settings, press [SETTING/GEAR].
Configuration
Change the settings of connection environment of the speakers.
Crossover
Change the settings of crossover frequencies.
Distance
Set the distance from each speaker to the listening position.
- Default values vary depending on the regions.
- The unit of distance can be changed by pressing the MODE button on the remote controller. When using the unit "feet", the setting is available in increments of 0.1 ft from 0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of 0.03 m from 0.03 m to 9.00 m.
Level Calibration
Adjust the volume level of each speaker.
Dolby Enabled Speaker
Change the settings of Dolby Enabled Speakers.
- This setting can be selected when "Configuration" - "Height Speaker" is set to "Dolby Speaker".
Speaker Virtualizer
The Speaker Virtualizer function can be switched between On and Off.
Comments
0 comments
Please sign in to leave a comment.