TX-SR494 - Menu Operations: Quick Menu
Please use the following instructions to navigate through the Quick Menu option on the TX-SR494 AV Receiver.
You can quickly adjust the settings you frequently use, such as tone adjustments, etc.
You can make the settings on the TV screen during playback. Press "Q" on the remote controller to display the Quick Menu.
Select the item with the cursors of the remote controller, and press ENTER to confirm your selection.
Use the cursors to change the settings.
- To return to the previous screen, press [BACK ICON].
- To exit the settings, press "Q".
HDMI
A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap. The setting can be set for each input.
- It cannot be set if the listening mode is Direct.
Audio Return Channel: You can enjoy the sound of the HDMI-connected ARC compatible TV through the speakers connected to the unit. Select "On" when listening to the audio of TV using the speakers of this unit. Select "Off" when the ARC function is not used.
Audio
Music Optimizer: Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be set for each input. This works in signals whose sampling frequencies are 48 kHz or less. The setting is not effective in the bitstream signals.
- It cannot be set if the listening mode is Direct.
Late Night: Enable small sounds to be easily heard in detail. It is useful when you need to reduce the volume while watching a movie late night. You can enjoy the effect only when playing the Dolby series and DTS series input signals.
- This function cannot be used in the following cases.
– When playing Dolby Digital Plus or Dolby TrueHD with "Loudness Management" set to "Off"
– When the input signal is DTS:X, and "Dialog Control" is not 0 dB - If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.
AccuEQ
AccuEQ: Enable or disable the equalizer function that corrects for sound distortion caused by the acoustic environment of the room. To enable this setting, normally select "On (All Ch)", and to disable only the front speakers, select "On (ex. L/R)". The setting can be set for each input.
Cinema Filter: Adjusts the soundtrack with the enhanced high range so that it suits a home theater.
In this function, the following listening modes can be used: Dolby Audio - DD, Dolby Audio - DD+, Dolby Audio - Surr, Dolby Audio - TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24, DTS-HD High Resolution, DTS-HD Master Audio, DTS Neural:X, DTS Express and DSD.
- It cannot be set if the listening mode is Direct.
Level
Front: Adjust the speaker level of the front speaker while listening to the sound.
Center: Adjust the speaker level of the center speaker while listening to the sound.
Subwoofer: Adjust the speaker level of the subwoofer while listening to the sound.
- If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.
Comments
0 comments
Please sign in to leave a comment.