PR-SC5507-Front Panel
The actual front panel has various logos printed on it. They are not shown here for clarity.
- ON/STANDBY button-This button is used to set the AV controller to On or Standby
- STANDBY indicator-Lights when the AV controller is in Standby mode, and it flashes while a signal is being received from the remote controller
- ZONE 2 indicator-Lights when Zone 2 is selected
- ZONE 3 indicator-Lights when Zone 3 is selected
- Input selector buttons-These buttons are used to select from the following input sources: DVD/BD, VCR/DVR, CBL/SAT, GAME, AUX 1, AUX 2, TV/TAPE, TUNER, CD, PHONO, PORT, NET/USB
- Remote control sensor/transmitter-The sensor receives control signals from the remote controller and the transmitter transmits setting data to the remote controller
- Display
- MASTER VOLUME control and indicator-This control is used to adjust the volume of the AV controller to –Q dB, –81.5 dB through +18.0 dB (relative display)
- PURE AUDIO button-Selects the Pure Audio listening mode. Pressing this button again selects the previous listening mode
- PHONES jack-This 1/4-inch phone jack is for connecting a standard pair of stereo headphones for private listening
- ZONE 2, ZONE 3, and OFF buttons-The [ZONE 2] button is used to select Zone 2, [ZONE 3] button is used to select Zone 3 and the [OFF] button is used to turn off Zone 2 or Zone 3
- TONE button-Used to select the tone (bass and treble) for the main room, and the tone and balance for Zone 2 or Zone 3
- LEVEL button-Used to select the volume level of Zone 2 or Zone 3
- MONITOR OUT button-Used to set the “Monitor Out” setting
- LISTENING MODE buttons MOVIE/TV: Selects the listening modes intended for use with movies and TV
MUSIC: Selects the listening modes intended for use with music
GAME: Selects the listening modes intended for use with video games
THX: Selects the THX listening modes - DIMMER button (North American models)-This button is used to adjust the display brightness
RT/PTY/TP button (European and Asian models)-This button is used for RDS (Radio Data System). The [RT/PTY/TP] button does not work in areas where RDS broadcasts are not available. - MEMORY button-This button is used when storing or deleting radio presets
- TUNING MODE button-This button is used to select the Auto or Manual tuning mode
- Arrow, TUNING, PRESET and ENTER buttons-When the AM or FM input source is selected, the TUNING ^/v buttons are used to tune the tuner, and the PRESET [e]/[r] buttons are used to select radio presets. When the onscreen setup menus are used, they work as arrow buttons and are used to select and set items. The [ENTER] button is also used with the onscreen setup menus.
- SETUP button-This button is used to access the onscreen setup menus that appear on the connected TV
- RETURN button-This button is used to return to the previously displayed onscreen setup menu
- SETUP MIC jack-Audyssey MultEQ® XT Room Correction and Speaker Setup microphone connects here
- USB port-A USB mass storage device, such as a USB flash drive or MP3 player, containing music files can be plugged in here and the music selected can be played through the AV controller
- AUX1 INPUT-This input can be used to connect a camcorder, game console, and so on. There are jacks for composite video, analog audio, and optical digital audio
- Up and Down buttons-Used to adjust the tone (bass and treble) for the main room and the volume, tone and balance for Zone 2 or Zone 3
- DISPLAY button-This button is used to display various information about the currently selected input source
- POWER switch-(European and Asian models) This is the main power switch. When set to OFF, the AV controller is completely shutdown. It must be set to ON to set the AV controller to On or Standby
Comments
0 comments
Article is closed for comments.